exhaust rattle

M

mattzts

Member

Jun 27, 2005

160

0

16

clifton, nj

Jul 23, 2006

#1

• Jul 23, 2006

• #1

i didnt get this done and now i have magnaflow duels on, now i can here it more. would they stilll fix this for me. i mean its there hangers that are the problem?

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Jul 23, 2006

#2

• Jul 23, 2006

• #2

which rattle? the one in TSB 06-4-1? if so, just go buy some 3", size 40 stainles worm clamps. depending on how the duals run, you might need to do both sides.

do you have the text for this TSB? if not, i can email it to you.

 

G

gbfan126

New Member

Apr 25, 2005

4

0

0

Jul 26, 2006

#3

• Jul 26, 2006

• #3

I really need help on this too because my mag. are rattalin llike a mf'er

 

hutcccch

New Member

Mar 29, 2006

92

0

0

Jul 27, 2006

#4

• Jul 27, 2006

• #4

I have flowmaster duels on my car and i have a rattle on the right muffler. I just went under my car and i could move the right muffler a little bit that makes the rattle but on the left it doesnt move at all. But when i look at both hangers they look the same so i dont know what to do ? Any suggestion would be awsome i will have some pictures in a minute after i get done with this post.

 

hutcccch

New Member

Mar 29, 2006

92

0

0

Jul 27, 2006

#5

• Jul 27, 2006

• #5

The first one and the third one is the one messed up. Do you guys see anything the matter with it?

 

Attachments

• 0000033hr6.th.webp

  2.8 KB · Views: 185
• 0000034zz2.th.webp

  2.8 KB · Views: 165
• 0000035fe2.th.webp

  2.8 KB · Views: 171

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Jul 27, 2006

#6

• Jul 27, 2006

• #6

is it rubbing on any of the body, or the rear bumper reinforcement? my drivers side rubbed on the bumper a little and squeeked all the time. i just needed to readjust them agin, since they hifted a littke when i install the h pipe.

 

S

shooterm1

New Member

Jul 18, 2005

540

1

0

Milford, Pennsylvania USA

Jul 27, 2006

#7

• Jul 27, 2006

• #7

hutcccch said:

The first one and the third one is the one messed up. Do you guys see anything the matter with it?

Click to expand...

Yes, they are flimsy aftermarket brackets ...

I had some just like them on mine and had nothing but trouble with rattles.

You might want to get another set of Ford brackets.

 

hutcccch

New Member

Mar 29, 2006

92

0

0

Jul 28, 2006

#8

• Jul 28, 2006

• #8

I just went to a exhaust shop and they are going to fic it. Thanks for the help !

 

N

newbstang05

New Member

Mar 25, 2006

44

0

0

Albuquerque, NM

Jul 28, 2006

#9

• Jul 28, 2006

• #9

i had the exact same problem when i went with the dual mac kit. i took it to a muffler shop to have it installed and i took it back when i couldnt stand the rattling anymore, but they didnt really fix it. i ended up thinking that it was probly the factory rubber hangers that were rattling, so i took both driver and passenger side rear hangers (furthest from muffler tip) off and just using the front ones to hold the mufflers in place. it is 100% better now and i have not heard rattling since.

 

T

The Fang

Member

Sep 11, 2005

602

0

16

Tallahassee Fl

Jul 29, 2006

#10

• Jul 29, 2006

• #10

Magnaflows 16605

I too have had the rattle only when I hit a bump in the road. If I loosen them and make the right one not line up with my valence cut out it won't rattle. but who wants it to look ****ty right.
IMO the design is of the over the axle pipes is crappy cause its to close to the other parts on the car and the location of the flows sucks toooo. and have u laid the back seats down and tried riding around jeesh u cant here the radio.
I do love the sound of the them outside and plan on getting an H pipe installed so I hope then I can get that cured then.

 

GrayPony

Member

May 9, 2006

62

0

7

Jul 29, 2006

#11

• Jul 29, 2006

• #11

Check your seatbelt catch attachment bolt (dr side). The factory had an xtra long bolt in mine and that was hitting the over the axle pipe on bumps. I replaced it with a proper length bolt and no more rattle.
I can say I wasn't impressed with the magnaflow fit. It took quite a bit of time, welding and adjustment to get them rattle free.

GP

 

hutcccch

New Member

Mar 29, 2006

92

0

0

Jul 29, 2006

#12

• Jul 29, 2006

• #12

GrayPony how do your exhaust sound? I have flowmaster but im wondering what the magnaflow sound like.

 

GrayPony

Member

May 9, 2006

62

0

7

Jul 31, 2006

#13

• Jul 31, 2006

• #13

hutcccch said:

GrayPony how do your exhaust sound? I have flowmaster but im wondering what the magnaflow sound like.

Click to expand...

Magnaflow has sound clips on their site.
Mine sounds pretty close to the clip.

http://www.magnaflow.com/04sound/domestic/mustang6l.htm

 

hutcccch

New Member

Mar 29, 2006

92

0

0

Jul 31, 2006

#14

• Jul 31, 2006

• #14

On there site it doesn't sound very good in my opinion. I was just wondering if yours sounds any differnet.

 

M

mattzts

Member

Jun 27, 2005

160

0

16

clifton, nj

Jul 31, 2006

#15

• Jul 31, 2006

• #15

ill just take it to the shop i had put it on and tell them to make it stop lol.

 

T

The Fang

Member

Sep 11, 2005

602

0

16

Tallahassee Fl

Aug 1, 2006

#16

• Aug 1, 2006

• #16

GrayPony said:

Check your seatbelt catch attachment bolt (dr side). The factory had an xtra long bolt in mine and that was hitting the over the axle pipe on bumps. I replaced it with a proper length bolt and no more rattle.
I can say I wasn't impressed with the magnaflow fit. It took quite a bit of time, welding and adjustment to get them rattle free.

GP

Click to expand...

Thanks for the tip Greypony. I see that bugger now and mine is the passenger side. I will cure it this weekend.