Exhaust Thoughts

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 1, 2012

#1

• Mar 1, 2012

• #1

Down to the final steps before paint and the exhaust is next. I have not decided on a brand yet but Pypes , Maganflow or Flowmaster seem to be the choices. The car is a 69 Sport Roof with a 351 Cleveland and FPA headers, 2 1/2 pipes. I am interested in a muted sound when cruising and a throaty sound under acceleration. I am also interested in H or X pipe. But don't know the best choice. I understand that any of the choices above will require fabrication from the collectors back to the pipe kit. But the rest of the installation, including the X or H pipe has to be a good fit. Any thoughts, opinions, or advice will be appreciated. ,

 

Falcon79

Active Member

Apr 6, 2009

214

8

29

Dallas, TX

Mar 1, 2012

#2

• Mar 1, 2012

• #2

I have a set of Pypes cat back with the street mufflers and an X pipe. The sound is nice, not too loud at idle and throaty when I lay on the gas. However, I couldn't do the install myself due to the pipes not lining up with the long tube headers (hedman). I took it to a muffler shop that does a lot of racing work. After he finished the job he told me that it was one of the most difficult to work with kits he has ever encountered. If you are planning on doing the work yourself, maybe take that into consideration. Otherwise, I am pretty satisfied.

 

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 1, 2012

#3

• Mar 1, 2012

• #3

Falcon79 said:

I have a set of Pypes cat back with the street mufflers and an X pipe. The sound is nice, not too loud at idle and throaty when I lay on the gas. However, I couldn't do the install myself due to the pipes not lining up with the long tube headers (hedman). I took it to a muffler shop that does a lot of racing work. After he finished the job he told me that it was one of the most difficult to work with kits he has ever encountered. If you are planning on doing the work yourself, maybe take that into consideration. Otherwise, I am pretty satisfied.

Click to expand...

 

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 1, 2012

#4

• Mar 1, 2012

• #4

Thanks what did that install run if you mind me asking.

 

woodsnake

15 Year Member

Jan 16, 2007

1,352

15

69

Hicksville, NY

Mar 1, 2012

#5

• Mar 1, 2012

• #5

If you are interested in sound bites, youtube has GOOBS of exhaust clips....

 

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 1, 2012

#6

• Mar 1, 2012

• #6

woodsnake said:

If you are interested in sound bites, youtube has GOOBS of exhaust clips....

Click to expand...

What are you using Woodsnake.

 

woodsnake

15 Year Member

Jan 16, 2007

1,352

15

69

Hicksville, NY

Mar 2, 2012

#7

• Mar 2, 2012

• #7

What am I using? For what, exhaust?
My 68 has 2 1/2 pipe,with magnaflow, my 69 currently has 2 inch pipe with purple hornies, my 67 has 2 1/2 pipe with plain old fashioned glass packs. When I rebuild the motor in my 69, it will be getting magna flow as well...I'll leave the 67 alone, I like the way it sounds.

 

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 2, 2012

#8

• Mar 2, 2012

• #8

woodsnake said:

What am I using? For what, exhaust?
My 68 has 2 1/2 pipe,with magnaflow, my 69 currently has 2 inch pipe with purple hornies, my 67 has 2 1/2 pipe with plain old fashioned glass packs. When I rebuild the motor in my 69, it will be getting magna flow as well...I'll leave the 67 alone, I like the way it sounds.

Click to expand...

Thanks

 

candphall

Active Member

Jun 8, 2009

488

32

49

Orlando Florida

Mar 3, 2012

#9

• Mar 3, 2012

• #9

Dynomax are on the way!

 

68stang351

Founding Member

May 16, 2002

850

9

39

Savoy TX

Mar 3, 2012

#10

• Mar 3, 2012

• #10

I have a Pypes X pipe with cutouts on my 68, and I love it. Lol, I haven't put the mufflers on yet, it sounds good like it is with just straight X. I've been driving it like this for a few months now.

 

Falcon79

Active Member

Apr 6, 2009

214

8

29

Dallas, TX

Mar 5, 2012

#11

• Mar 5, 2012

• #11

The shop charged me about $200 for the install.

 

robbz28

Member

Sep 23, 2009

775

5

19

Epps, LA

Mar 5, 2012

#12

• Mar 5, 2012

• #12

FWIW, I have the 2.5" mandrel kit from summit with the IMCO turbo mufflers, The kit only cost 200 bucks, but it cost me 200 to have it installed because nothing lined up like it was supposed to, but still 400 for a fully mandrel bent 2.5" turbo kit isn't too bad. It sounds ok, not too loud, fairly quiet at idle, just a little growl to it when you accelerate. I had flowmasters on my camaro and it was just too loud, sounded great outside the car, but couldnt hear yourself think inside the car.

 

65wildstang

Member

Mar 25, 2011

66

0

7

Loretto, TN

Mar 7, 2012

#13

• Mar 7, 2012

• #13

Same here with 40 series Flowmasters. Cruising around 65-70 mph was torture. Couldnt carry on a conversation. Im going with the magnaflows 1st, if the drone inside is still to loud I will go withe Dynomax turbos.

 

Wicked65

Member

Aug 10, 2003

490

3

19

NORCAL

Mar 7, 2012

#14

• Mar 7, 2012

• #14

X pipe with magnaflows here. Cant beat the sound. with out the flowcrapper drone.

and as far as pypes...ehhhh....

 

iskwezm

10 Year Member

May 24, 2005

4,159

20

79

Rowland Heights,California

Mar 7, 2012

#15

• Mar 7, 2012

• #15

I have a single 3.5" Magnaflow.Dumped it was too loud so i added a tailpipe with a flange to remove it.Its quiet enough now to talk over on the freeway.