What is the diameter of Mach 1 exhaust tips, I found a pair cheap but was wondering if they were any bigger than the GT's
Exhaust tip ?
- Thread starter 306notchback
- Start date
What year GT's? The Mach 1 tips have rolled edges so they may appear larger than 94-98 GT's. The stock tips on 99-04 GT's are larger than the 94-98GT's.
They are stock off an 03 mach 1, I have a 01 gt, I knew they had rolled edges but was wondering if the diameter was the same!
Crzyhrse
Active Member
They are 3" OD just like the GT tips, but are rolled.
The cat-back piping is 2 1/4"
I have a pair that were cut off a Mach 1 with 50 miles..i paid $40 for them but never used them
sell it to me.
They are 3" OD just like the GT tips, but are rolled.
The cat-back piping is 2 1/4"
I have a pair that were cut off a Mach 1 with 50 miles..i paid $40 for them but never used them
I cant decide weather to buy the Mach tips or wait and get some 3.5" rolled tips, also thought of getting straight cut instead of the slash, I seen Bullitt the other day with straight cut rolled tips and it looked sweet!
I thought the same thing. That's why i bought the Mach 1 tips. The thing was the piping on my Flowmaster cat-back was 2.5" and the mach tips are 2.25" where you would weld them on.
I decided to go MRT rolled tips. You can get 3", and a little bit longer than the mach's tips are. I never got them though. Decided to sell the car
I decided to go MRT rolled tips. You can get 3", and a little bit longer than the mach's tips are. I never got them though. Decided to sell the car
Crzyhrse
Active Member
So much for doing a search over at Mach1registry. I could'nt remember what size they were either, so I looked it up and someone wrote they were 2 1/2". I had my stock exhaust taken off after a couple months back when I bought my Mach four years ago. I think 3 1/2" tips look best. I think 4" tips are too big.
