Get a header from www.racerwalsh.com or Pacesetter, whatever cat/muffler combo you want and a 5.0 tailpipe. You'll need an intermediate pipe made at a muffler shop as well as an O2 bung put on the header.
hey thanx but i was just looking for my girlfriends car she wants it to sound good im not woried about making it fast or anything cause there not, but just somthing to give it a tone.
alright thanx! so i need somthing like a 20" flang to flang muffler thats offset on one end and i can use one of my old 5.0 tail pipes!? oh and then a pipe in front of the muffler.
you need a 22" long section of 2-1/4" outside diameter exhaust pipe, a Flowmaster 42443 or equivalent muffler, the driver side 5.0 tailpipe plus a peice of 6" radius 2-1/4" outside-outside diameter exhaust elbow IF your tailpipe was hacked too short where it's supposed to go into the muffler.
Have an exhaust shop weld a new ball and socket joint to the end of the straight pipe, or cut off the old one and use that. Then you need to have them cut off the old muffler hanger and weld that on. Then if needed cut the tailpipe and weld on the elbow as necessary. Install using factory muffler and tailpipe hangers, and two exhaust clamps on muffler.
This is not the first time I typed this................
GTkid, your girlfriends car looks exactly like mine did, same color and tires. Now I have some ponys and a new hatch from a GT on the back, which squeaks like crazy when going down the road.