Exhaust?

If that was my setup:

Ceramic FRPP shorty headers
MAC prochamber or BBK H-pipe
MAC flow path mufflers (what I install over winter) or Flowmasters

For the exaust cutouts you'll probably have to buy all the parts yourself and have a muffler shop weld them in. I don't think there is a company out there that makes them in the H/X pipes today.

doing a search will help you a lot

RacEoHolic330 said:

doing a search will help you a lot

Click to expand...

:Word:

just run full lenght open headers routed out the side....:SNSign:

I wouldn't reccomend doing the cut-outs. It will most likely be more trouble then it's worth, and you won't see any performance gain over a good 2 1/2 full exhaust system. Spend the extra money on a good quality exhaust system. You get what you pay for, don't buy something thats not going to fit right or something thats going to rust after 1 week. There are lots of different choices out there. I personally have ceramic-coated BBK longtube headers, a BBK shorty X-Pipe, and 2 1/2 Flowmaster cat-back system. Longtubes are more expensive and harder to install, but they generally make more HP and torque. Then there are shorty headers, but there are different kinds, equal length and un-equal length, and they all have their pros and cons. Do you have emissions inspections requiring catalytic converters? If so, get a good high-flow cat 2 1/2 inch H or X-pipe. H-pipes with cats don't sound as good in my opinion, and are a lot quieter. Or you can buy the off-road H or X-pipe (no cats) and just put your stock h-pipe back on when emissions time comes around. Mufflers are personal preference, I like my flowmasters, and I've had the same set for 7 or 8 years now.

Agreed, the cutouts are a waste of time and money, and will probably leak.

Magnaflow mufflers are straight through- so there will be no performance advantage to using cut outse-

Exhaust?

What exhaust!?

Last I knew it was cool driven down the road with zoomies :SNSign:

Speaking of zoomies,some one should buy these just fore the sake of having them.There probably the only set I have ever seen for a Ford,let alone a small block.

http://www.racingjunk.com/exec/ca/view/486924/Set-of-Zoomie-Headers-for-351W.html