I have been having a problem with oil making its way into the intake manifold and even collecting at the throttle body. At first I thought my lower manifold needed machining but the machinist told me I probably have very high crank case pressure causing this problem. Its also causing the back of the lower manifold seal to blow out and leak down the back of the block. I have only a small breather on the passenger side cylinder head cover but I have plenty of room to put another breather on the driver side too. Would this help with my pressure problem?
I also thought it might be a good idea to install the steeda oil seperator kit to help collect some of this oil from the pcv valve and keep it away from the intake.
Any suggestions appreciated
Thanks!
I also thought it might be a good idea to install the steeda oil seperator kit to help collect some of this oil from the pcv valve and keep it away from the intake.
Any suggestions appreciated
Thanks!