F150 Guy With A Turbo 5.4 3v Seeking Advice

[BrianKaiser]

How's it going y'all. I'm taking a shot at the Mustang community for some help on my build. I've had a hard time getting useful information from the truck guys on my turbo build as not too many of them have done so. I have a 2004 F150 Lariat 5.4 3v that I have a gt35 turbo setup fabricated and am down to the last final details that I need help with. Mainly routing of the PCV system for a forced induction build. Maybe one of y'all can point me in the right direction wether it be through this post or directing me to the right part of this site to do so. Thanks in advance, Brian.

 

[General karthief]

On the main foums page look for 'other auto tech' post your needs there and be specific about your build, things like what computer stuff your using along with any modifications to the engine, mas air or speed density, that kind of thing, I will keep an eye for responses and if needed will grab a member that has experience with 5.4s and turbos and ping them up for ya,
Good luck and welcome to stangnet.

 

[BrianKaiser]

On the main foums page look for 'other auto tech' post your needs there and be specific about your build, things like what computer stuff your using along with any modifications to the engine, mas air or speed density, that kind of thing, I will keep an eye for responses and if needed will grab a member that has experience with 5.4s and turbos and ping them up for ya,
Good luck and welcome to stangnet.

Great! Thanks for the help!