• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fault Codes

  • Thread starter Thread starter 88-GT
  • Start date Start date May 28, 2006

88-GT

Member
Oct 8, 2004
183
2
18
May 28, 2006
#1
  • May 28, 2006
  • #1
I have been having major drivability problems in the stang for a while now and finally got around to pulling the codes. The symptoms are severe hesitation, which usually results in a backfire if I dont get out of the gas, and lately the car will not cruise without bucking.

It idles with no surging and WOT feels good and strong, only becomes a problem when changing speeds, especially with moderate throttle.

Anyways the codes that came up were 67 and 81 for the current codes, and 18 for the stored codes.

67 is a neutral sensor which may have been from installing my clutch and 81 is a thermactor circuit which would result from me taking it out.

18 on the other hand says "Loss of tachometer input/IDM circuit failure/spout circuit grounded". I really have no idea where to start with that. Could this be the cause of my poor performance? How would I go about fixing it?

Thanks, Adam.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
May 29, 2006
#2
  • May 29, 2006
  • #2
Code 18 - SPOUT out or wiring fault - look for short to ground in SPOUT wiring going back to the computer. Possible bad TFI.
 
You must log in or register to reply here.

Similar threads

P
Repeated P2004 DTC trouble code with no apparent symptoms
  • poehitman
  • Mar 11, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
156
SN95 V6 Mustang Tech Mar 12, 2026
poehitman
P
J
Thanks for the information on codes 31,34,44 and 94!
  • JK86LX50
  • Mar 5, 2025
  • The Welcome Wagon
Replies
3
Views
257
The Welcome Wagon Aug 5, 2025
gkomo
Running codes no code 67 but I’m not holding clutch down
  • Creomod
  • Apr 2, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
569
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 3, 2024
Creomod
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
651
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Engine Throwing codes 94, 33, 34, 44, and sporadic engine shutoff.
  • Ryu
  • Oct 9, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
836
Fox 5.0 Mustang Tech Oct 16, 2024
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?