• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Finally Got Back to the Track; HD vids!

  • Thread starter Thread starter sneaky98gt
  • Start date Start date Feb 21, 2011
  • 1
  • 2
Next
1 of 2 Next Last

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 21, 2011
#1
  • Feb 21, 2011
  • #1
Yup, finally got back to the track, first time since October. I went down to Fayetteville Motorsports Park, which is the track that I had bad luck with a while back. DA was right at 0 feet. I killed the reaction times! Averaged .045.

My best run:
RT: .0442
60': 1.91
330: 5.37
1/8: 8.22
Trap: 86.94
1/4: 12.78
Trap: 106.96

YouTube - My 98 GT and Joe's Bullitt


Considering that I didn't have my lighter front tires (~12 pounds unsprung weight), we had a headwind of about 10 mph, I had some timing pulled and fuel added because of a detonation problem on the previous runs, my 60' was down almost a tenth, and that it was Fayetteville, I was pretty happy with my time considering my previous best was 12.65 with none of those issues.

I did decide that I'm not going back to that track again. Although my times were actually decent this time, the folks running it pissed me off enough that I'll stick to other, nicer tracks in the area. I got to run 5 times over 6 hours, and that was me being in line the whole time. Thing was, there wasn't even a hundred cars there. They were just really slow about running cars through. They made me run one time with water on the track. I was told that "it wasn't that much" and that "it wouldn't affect my street car." That really pissed me off. And I got cussed out for a friend wanting to ride with me. I don't understand why 8 second drag cars can run with no tech inspection, but passengers can't ride in 14 second street cars. I'll stick to Rockingham, Piedmont, and OBX from here on.


Anyways, here's a few other videos I got. Be sure to watch in HD!

This one is of me running a Kenne Bell SRT-8 Challenger. That car was definitely moving on out. I cut a .06 light on this one. And in the video, you can see I pulled the one-tire-fire of shame.... My car has always pulled both in the past. I guess this just gives me an excuse to rebuild the LSD and put in 3.73s.
YouTube - Up Against a Kenne Bell SRT-8 Challenger

This is of me running a Maxima. .03 RT!
YouTube - Me v. Nissan

And here's one of a Fox losing it and almost taking another car out with him. I'm sure both of them changed their underwear on the return road.
YouTube - A Fast Nissan Almost Getting Taken Out By a Fox

I've got a ton more videos, but I'm trying to compile them all into one video first. Hopefully get it up sometime.
 

Rejekt

Member
Aug 12, 2010
546
13
18
Raleigh, NC
Feb 21, 2011
#2
  • Feb 21, 2011
  • #2
That Maxima had me cracking up man lol

The guy in the fox looked like he ***** himself lol

Nice vids man. I enjoyed 'em. Ever go to Dunn / Benson?
 

SteedaGT9150

Advanced Member
Nov 10, 2004
1,351
59
68
Maryland
Feb 22, 2011
#3
  • Feb 22, 2011
  • #3


i cant wait to have a blown car
 

bhuff30

Founding Member
Dec 11, 2001
6,037
35
129
Olathe KS
Feb 22, 2011
#4
  • Feb 22, 2011
  • #4
I finally got the chance to watch the videos. Looks like great fun.

That fox loosing it is really scary. He was launched hard and straight and suddenly lost it! There had to be something break on the car because it looked like it hooked hard and solid before sending him sideways. Amazing he saved it though.
 

N8Dogg98

15 Year Member
Apr 4, 2005
3,872
238
184
MN
Feb 22, 2011
#5
  • Feb 22, 2011
  • #5
bad a** man... chit was scary with that fox though... wow
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 22, 2011
#6
  • Feb 22, 2011
  • #6
Yea, that was pretty scary. I was actually lined up beside him originally, but someone in the other lane didn't go. So I got to change lanes and run my buddy in the Bullitt.

I didn't talk to the guy, but I don't remember him running anymore that day. I'd definitely guess that he broke something. The guy in the Maxima posted up an incar video of that race, and the Fox left REALLY hard, no wheel spin. So something must have happened to turn him sideways.

Rejekt said:
That Maxima had me cracking up man lol

The guy in the fox looked like he ***** himself lol

Nice vids man. I enjoyed 'em. Ever go to Dunn / Benson?
Click to expand...

Yea, he was cool as could be. Almost outrun a 2011 5.0. Were you actually there?

Dunn/Benson is the only track east of Greensboro I haven't been to. You normally head out that way?
 

tank_567

Active Member
Mar 19, 2007
731
26
29
Raleigh, Nc
Feb 22, 2011
#7
  • Feb 22, 2011
  • #7
I want to race you next

sneaky98gt said:
Dunn/Benson is the only track east of Greensboro I haven't been to. You normally head out that way?
Click to expand...

Not a big fan but I go a lot.
 

Rejekt

Member
Aug 12, 2010
546
13
18
Raleigh, NC
Feb 22, 2011
#8
  • Feb 22, 2011
  • #8
sneaky98gt said:
Yea, he was cool as could be. Almost outrun a 2011 5.0. Were you actually there?

Dunn/Benson is the only track east of Greensboro I haven't been to. You normally head out that way?
Click to expand...


No, i was laughing when the video came up. That thing sounded like a mad bee..

Yeah, I've been to Dunn / Benson a few times. I have a few friends who run down there (Mustangs, Novas, Camaros). They run bikes too which another one of my friends runs. It's an 1/8th mile though. I like riding my bike (04 GSXR 1000) down but haven't ran it yet.
 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!
Founding Member
Nov 29, 1999
5,520
1,291
224
H Town
Feb 22, 2011
#9
  • Feb 22, 2011
  • #9
Good runs, Will!

I watched those last night when you uploaded them. They are great quality. What video camera are you guys using?
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 22, 2011
#10
  • Feb 22, 2011
  • #10
tank_567 said:
I want to race you next



Not a big fan but I go a lot.
Click to expand...

Sunday. Rockingham. Be there.



I'm up for it anytime. You better go ahead and beat me within the next month or two. You might have a harder time come about May. rubhands

I want to see you or your brother's car run sometime. Send me a message next time you guys are heading to the track.

That's what I hear about Dunn/Benson. Kinda hit or miss. I'll have to head out one time and see for myself.

Rejekt said:
No, i was laughing when the video came up. That thing sounded like a mad bee..

Yeah, I've been to Dunn / Benson a few times. I have a few friends who run down there (Mustangs, Novas, Camaros). They run bikes too which another one of my friends runs. It's an 1/8th mile though. I like riding my bike (04 GSXR 1000) down but haven't ran it yet.
Click to expand...

Haha, it sounded kinda bad, but it was very impressive. Minimal mods and he was in the 12s with a NA, full interior, FWD, V6.

You should ride down with the club here at State the next time we go. We have all sorts of cars in the club, but the last few times we've gone, it's been a bunch of Mustangs, lol.

Winters98GT said:
Good runs, Will!

I watched those last night when you uploaded them. They are great quality. What video camera are you guys using?
Click to expand...

Thanks, Mark! I'd hardly call them good runs, but it was definitely great to get back onto the track again. I'm hoping to go again this weekend as well.

I was using a Sony CX110. I'm also very impressed with it. Walmart had it on sale for $100 off the usual price, and it was the cheapest HD camcorder with a decent amount of zoom. Next time we go, it'll be on a tripod where it can really shine. We'll also be able to get down closer to the track with some better angles. I'm definitely hoping to get some good videos of my car next go round.


Also, I made a nice compilation of all the videos we took. However, it's 8 minutes long and 1.4 gigs, so it's taking quite some time to upload to Youtube. Probably be tomorrow morning before it gets up.
 

tank_567

Active Member
Mar 19, 2007
731
26
29
Raleigh, Nc
Feb 23, 2011
#11
  • Feb 23, 2011
  • #11
sneaky98gt said:
Sunday. Rockingham. Be there.



I'm up for it anytime. You better go ahead and beat me within the next month or two. You might have a harder time come about May. rubhands

I want to see you or your brother's car run sometime. Send me a message next time you guys are heading to the track.

That's what I hear about Dunn/Benson. Kinda hit or miss. I'll have to head out one time and see for myself.
Click to expand...

rubhands <--- hmmmm not liken that emoticon lol, new car maybe? Anyways today im getting my car dyno'd to see what the edddy intake does w/ 14lbs of boost Also my brother installing Patriot stage 2 heads, custom blower cams, the eddy intake, and a new bottom end on his car. We will sir, btw nice times! Wish my non pi was that fast when I owned one
 

navarro98gt

Member
May 15, 2003
213
3
16
chicago, IL
Feb 23, 2011
#12
  • Feb 23, 2011
  • #12
Nice runs!! I can't wait to get back to the track this spring.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 23, 2011
#13
  • Feb 23, 2011
  • #13
tank_567 said:
rubhands <--- hmmmm not liken that emoticon lol, new car maybe? Anyways today im getting my car dyno'd to see what the edddy intake does w/ 14lbs of boost Also my brother installing Patriot stage 2 heads, custom blower cams, the eddy intake, and a new bottom end on his car. We will sir, btw nice times! Wish my non pi was that fast when I owned one
Click to expand...

Nah, same car. As soon as the funds come around, there'll be 3.73s in it, along with 4 more pounds of boost and methanol. Should be good for deep, deep 12s.

Definitely post up the results of your dyno. Are you going to be at the dyno day at PCM next month? I'm going to be hitting the rollers again there. It's funny, March 19 of last year was the day it got tuned.

navarro98gt said:
Nice runs!! I can't wait to get back to the track this spring.
Click to expand...

Thanks man! I was so excited as well. I love good, fun track days.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 23, 2011
#14
  • Feb 23, 2011
  • #14
Oh yea, here's the compilation. Enjoy!

YouTube - Fayetteville Motorsports Park 2-20-11
 

d98gt

Founding Member
Mar 14, 2002
4,505
59
204
SE Texas
Feb 23, 2011
#15
  • Feb 23, 2011
  • #15
Congrats on the times and looks like you had a good time.

3.73s, 4 lbs of boost, meth, and a 3500 stall and you'll be set
 

Rejekt

Member
Aug 12, 2010
546
13
18
Raleigh, NC
Feb 23, 2011
#16
  • Feb 23, 2011
  • #16
Haha, it sounded kinda bad, but it was very impressive. Minimal mods and he was in the 12s with a NA, full interior, FWD, V6.

You should ride down with the club here at State the next time we go. We have all sorts of cars in the club, but the last few times we've gone, it's been a bunch of Mustangs, lol.
Click to expand...

Damn, 12 second Maxima...

What is the name of the club? Let me know next time you guys go. I may take you up on that offer.

BTW nice compilation vid. Well edited and great quality. I still don't see how those bikes race with one wheel in the air the whole way. That is nuts.
 

tank_567

Active Member
Mar 19, 2007
731
26
29
Raleigh, Nc
Feb 23, 2011
#17
  • Feb 23, 2011
  • #17
sneaky98gt said:
Nah, same car. As soon as the funds come around, there'll be 3.73s in it, along with 4 more pounds of boost and methanol. Should be good for deep, deep 12s.

Definitely post up the results of your dyno. Are you going to be at the dyno day at PCM next month? I'm going to be hitting the rollers again there. It's funny, March 19 of last year was the day it got tuned.
Click to expand...

Naw didnt make it to the dyno today... Anyways I will be @ the dyno day got some crazy stuff planned for my bro and I turbo cars.. BTW loved the video
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 23, 2011
#18
  • Feb 23, 2011
  • #18
Thanks for the compliments guys! I was kinda excited about having a bunch of good quality HD videos from the track that I could throw together like that. Hopefully there'll be many more this year.

d98gt said:
3.73s, 4 lbs of boost, meth, and a 3500 stall and you'll be set
Click to expand...

Great minds think alike.

Rejekt said:
What is the name of the club? Let me know next time you guys go. I may take you up on that offer.
Click to expand...

It's the Wolfpack Auto Racing Club, formerly the Wolfpack Drag Strip Club. It's just a bunch of really cool guys from State with all different kinds of cars and setups that love racing cars. Quite an awesome group to hang out with.

I'm possibly going to Rockingham this weekend, either Saturday or Sunday. I don't know how many of the other guys will go as well, but I'll shoot you a note as soon as I know for sure.

tank_567 said:
Naw didnt make it to the dyno today... Anyways I will be @ the dyno day got some crazy stuff planned for my bro and I turbo cars.. BTW loved the video
Click to expand...

Oh boy. I'm ready for March 19 to roll around.

And BTW, you weren't at the Cookout in Raleigh around 11:30 tonight were you? Me and some guy in a black New Edge GT just like yours kinda got in an exhaust war....in the drive through....lol.
 

navarro98gt

Member
May 15, 2003
213
3
16
chicago, IL
Feb 24, 2011
#19
  • Feb 24, 2011
  • #19
A 3,600rpm stall speed torque converter, 15" drag rims all around w/ a sticky tire, and some weight reduction and hello low 12’s.

NPI/ positive displacement blower specific cams would definitely bring up that MPH with the added HP.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Feb 24, 2011
#20
  • Feb 24, 2011
  • #20
navarro98gt said:
A 3,600rpm stall speed torque converter, 15" drag rims all around w/ a sticky tire, and some weight reduction and hello low 12’s.

NPI/ positive displacement blower specific cams would definitely bring up that MPH with the added HP.
Click to expand...

Yea, I'm thinking that as well, although it'll probably be a little later down the road. In the near future, it'll probably be gears and possibly more boost/methanol.

My overall plan right now is to keep the car very driveable, as it is my DD. After a while, when I have another DD (probably a new 5.0), I might go a little crazy and have the 98 as a street/strip car. Maybe see how much I can get out of the stock NPI heads or something like that.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
137
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
M
93 5.0 Microsquirt with Stage 3 trickflow tuning issues
  • marxpreston11
  • Jun 22, 2026
  • Digital Self-tuning Forum
  • 2 3 4
Replies
67
Views
807
Digital Self-tuning Forum Jun 25, 2026
Mustang5L5
L
2012 Seats in 98 GT Convertible - pictures coming
  • lparsons42
  • Aug 11, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
248
1996 - 2004 SN95 Mustang -General/Talk- Aug 17, 2025
lparsons42
L
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
880
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
310
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?