• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

finally I got my CAR FIXED....

  • Thread starter Thread starter 90mustangfan
  • Start date Start date Nov 14, 2005

90mustangfan

New Member
Oct 18, 2005
93
0
0
So cal
Nov 14, 2005
#1
  • Nov 14, 2005
  • #1
I found out why i keept getting codes 41 and 91...well It made my car run in limp mode, cause it told the comp I was running dangersouly lean, I even bought ne O2 sensors, still same problem,Ive check vaccum leaks for weeks. still no fix , I had this problem and have been chasing it for 4 months...and it was all because of the Hego ground wire wasnt hooked up....and I found it, even though I have looked 10 times for that wire I finally found it...and now my car runs freakin perfect, now I can smog it, then rip all the smog shat off there...
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Nov 14, 2005
#2
  • Nov 14, 2005
  • #2
Very good! At least you don't have to put your car up for the winter....
 

Paul Perreca

New Member
Mar 30, 2005
1,085
0
0
Nov 14, 2005
#3
  • Nov 14, 2005
  • #3
what do u mean smog it?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 14, 2005
#4
  • Nov 14, 2005
  • #4
Paul Perreca said:
what do u mean smog it?
Click to expand...
Take it through emissions.
 

LT1Killa

New Member
Oct 16, 2003
192
0
0
Nov 14, 2005
#5
  • Nov 14, 2005
  • #5
Whoa! my car is throwing the same codes and acting funky.

Where is this ground located at so I can check it? I put new o2's in too.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 14, 2005
#6
  • Nov 14, 2005
  • #6
The HEGO ground is an orange 16 AWG wire. If floating around loose, it should be about in the middle of the firewall. Good luck.
 

LT1Killa

New Member
Oct 16, 2003
192
0
0
Nov 14, 2005
#7
  • Nov 14, 2005
  • #7
Thanks, I'll check that out tomorrow.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
518
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
392
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
261
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
M
Idle control problems
  • miser143
  • Aug 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
211
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 29, 2026
DadLife0724
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
716
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?