Finished my console

I decided to start my own thread instead of jacking isqwesms:

Sorry... and Thanks by the way!

http://forums.stangnet.com/showthread.php?t=608041

I had meant to post everything when it was done, but I couldn't resist.

Anyway, It's all wired up (except the door lock solonoids), and everything worked first try.

View attachment 490319

I threw some dropcloths over it to get a couple night shots, but only one came out of the AC switch:



Here is a pass side shot:

View attachment 490322

Next project(s) is to tear the doors apart and:

Rig the door lock solonoids in there and Put in new felts

While i'm working on the drivers door I have a new regulator to put in and a set of hinge pins with bushings.

Any tips?

Here is a question: What is the material inside the window tracks that helps it glide up and down? Is it Mohair? Can I buy that type material (whatever it is...) at an upholstery shop and glue in new stuff?

Thanks! :SNSign:

Thanks!

Mmmm... I never thought of matching the door panels... Good Idea.

I paid enough money for 'em, I think I'll leave them alone for now, but thanks for the suggestion!

Thanks!

I started getting the stuff together in October, but only got the rough wood frame put together 'til after the holidays. (had a lot of stuff going on)

But got a lot of it done in just the last week.

If I put a couple hours in each day, I coulda done it in 2-3 weeks I think.

Thanks for all the great comments!

The seats are '88 mustang GT seats as posted in page 3 of iskwesms thread I jacked:

http://forums.stangnet.com/showthread.php?t=608041

There are pictures and info on my seat swap there.

I actually had a factory console in the car when I got it back in '99. It was the short type, because it had the factory installed underdash AC unit.

Besides the rear ashtray and courtesy light, it had no real purpose other than to look stylish. (Got nice $$$ on ebay for the console and AC unit)

I wanted a console that incorporated a few things:

1. Storage (since the Vintage Air unit halved the space of my glove box)
2. Cupholders (here in the desert Southwest you don't get caught without liquid refreshment and spilling it once on my new carpet was all it took)
3. A better place for the center AC vents other than the tacky plastic things that came with the Vintage Air kit.
4. A switch for the AC. ('cause I like to be able to control when the compressor kicks in, not where the cable levers are placed)
5. A place for the door lock switch. (The window switches were a might as well for future upgrades.
6. A external surface that wouldn't hurt when you hit your elbow on it.
7. A comfy arm rest that won't burn your arm in the summer.

I did some research on the web and saw what others were doing as far as technique and materials, and came up with a design that fit my needs.