First Clutch Install

dkins419 · Oct 28, 2005

Alright guys im going to be doing my first clutch install. I know this has been posted many times and i posted something like this before, but the search doesn't load for me? Any tips or things I should know? I have a pilot bearing, rear seal has been done about 2 months ago by a mechanic, my flywheel will be resurfaced, and I have a steel bearing retainer. Can i reuse the flywheel bolts? Which loctite to use (green/red/blue)?

Also if anyone can do a search for me and copy jrichker's (sorry if i spelled it wrong but you guys know who im talking about or unless he sees this first) write up on a clutch install. Thanks - Dave

BlownFiveLiter · Oct 28, 2005

Check out the "how to" sticky in the 94-95 tech section. 5spd GT has a very good write-up in there on doing a clutch, and he put a parts list in the beginning of his post, for the commonly replaced parts when doing a clutch swap.

dkins419 · Oct 28, 2005

Thank you for the reply.

HISSIN50 · Oct 28, 2005

Here is Joe's post about it, and here is David's post. Both are outstanding. Good luck.

First Clutch Install

dkins419

New Member

BlownFiveLiter

have car, will race....wait, it doesn't run

dkins419

New Member

HISSIN50

"How long does it take to get help in here?

Similar threads

First Clutch Install

dkins419

New Member

BlownFiveLiter

have car, will race....wait, it doesn't run

dkins419

New Member

HISSIN50

"How long does it take to get help in here?

Similar threads

Privacy & Transparency

Privacy & Transparency