Fixin my Ponies

There was a thing somewhere about using JB weld to fix curb rash on a wheel that's going to be painted anyways.... This sounds pretty ghetto but we've actually done it. As long as the wheel isn't cracked or anything like that, you can use JB weld to fill in the rough spots, and then once it's dried you can sand it down so it's flush with the rest of the wheel. If you do it right and don't half ass it, and then repaint the wheels, NOBODY will know it's there but you.

The ONLY problem with this is when you go to get tires changed, since the machine could probably chip the JB off. The wheels we did it on only had curb rash on the outer lip, so the tire machine never touched the JB weld and this wasn't an issue.