Floor pan reinforcement

Ok, so my driver-side seat leans bad to toward the door.

After reading http://mustang.zeroentity.com/howto_artcls/howto_glean.html

I was thinking it was caused by a broken/bent seat frame like shown in that page.

Well after taking the seat apart and not finding any breaks/bends, I took a look at the underside of the car with a flashlight and although this car is totally rust free, there is a small crack in the floorpan near the rear outer seat anchor.

I saw this online so I ordered one:


Which I guess was standard on the polilce mustangs and so I ordered one ($40 with shipping.)

Well, tonight I was cleaning the carpet and took off the trim and pulled it up.

Looks like I already have that piece That support is there rivoted in place and it looks like it was there from the factory considering my car has the factory undercoating and I don't see any marks anywhere.

WTF, my car is a hatch and not a SSP car. Are those standard? I thougth I was buying a piece that was not standard.

FYI I have a set of MM XL subframes on order but I can't afford the price shops around here want to weld them for another few months.

hmm

Really? I thought all SSP cars were notches.

The car does have a ford racing 140 or 160 speedo in it (can't remember which one, but I know it says ford racing.)

My alternator doesn't look like a 3G either.

Anyway, anyone want to buy a floor pan reinforcement plate?

PM

PM me for payment details if you are interested in buying this from me.

I paid $30 for the part + $10 shipping from PPI so my total was $40.

I am still waiting for this thing to get here, but when it does get delivered I can either pay shipping back to PPI and get a refund less a 20% restocking fee (about $8 to ship and then I get $24 back so I am really getting about $16 back of my $40 purchase)

OR

I will sell it to someone here for $30 shipped. I pay about $8 to ship it to you so I net about $22 back.

Subframes are on order, I just need some cash to pay for the install...