Exhaust Flow Tubes For Canister Style Mufflers

Cheapskate207

The left one hangs a little lower

5 Year Member

Jan 12, 2020

761

541

113

Maine

Oct 22, 2020

#1

• Oct 22, 2020

• #1

I'm considering changing up my mufflers. If I switch to a round, canister/ straight muffler will I need special flow tubes or will my current flowmaster ones work? The reason I ask is because my flowmaster 40's are offset and I could see that causing alignment issues with non-offset mufflers and tailpipes. Thanks, Drew

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,056

1,641

194

NJ

Oct 23, 2020

#2

• Oct 23, 2020

• #2

You will probably need custom ones.
It's hard enough to get them to match similar mufflers (you can twist them a little to make closely spec'ed mufflers fit), so it's doubtful with a tube or bullet style.

 

Cheapskate207

The left one hangs a little lower

5 Year Member

Jan 12, 2020

761

541

113

Maine

Oct 23, 2020

#3

• Oct 23, 2020

• #3

That’s what I was figuring. Thanks

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,056

1,641

194

NJ

Oct 24, 2020

#4

• Oct 24, 2020

• #4

Keep in mind too, if you can see your mufflers from behind the car, sometimes those hacked in bullets can look awful because most likely they are going to go in at an angle.

 

Cheapskate207

The left one hangs a little lower

5 Year Member

Jan 12, 2020

761

541

113

Maine

Oct 26, 2020

#5

• Oct 26, 2020

• #5

Yea its a good point. Ill probably try my current flowmasters with the tailpipes. If I decided to change it up I'll go from there. The only bullets I'm considering are Magnapacks. If I go with those I'll probably have custom flow tubes bent.