• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Flowmaster Owners Check In!!!

  • Thread starter Thread starter DFG 5OH
  • Start date Start date Nov 5, 2004
Prev
  • 1
  • 2
First Prev 2 of 2
1

1hot5.0

Founding Member
Sep 6, 2002
1,615
0
0
Surprise, Arizona
Nov 7, 2004
#21
  • Nov 7, 2004
  • #21
Stangfreak95 said:
I have a few clips/passes but here's a couple vids from INSIDE the car. Enjoy

Just click on the link. Once you're in the new page, wait 5-10seconds for the AUTOMATIC download. Please SAVE As. I dont know how many times this can be downloaded before it becomes unavailable.

Video1

Video2
Click to expand...

Makes me want to swap to an h-pipe with 2 chamber flows.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 7, 2004
#22
  • Nov 7, 2004
  • #22
I'd personally stay away from having a shop fab up an h-pipe unless they're doing it using mandrel bent tubing. Otherwise they'll compression bend it, and have restrictions at every bend, kinda defeating the purpose of getting it in the first place. I have a bastard exhaust to an extent, with a MAC O/R X pipe, MAC cat back (only the flow tubes and tailpipes), with 2 chamber flowmaster mufflers. Sounds good to me. If I had it to do over again, I would've spent the extra money and gotten polished stainless tailpipes instead of the chrome ones, as they're rusted to death. An SOS pad on them several times a year helped for a while, but now they're all pitted and just need replacement. The mufflers are only lightly rusted, except for the scrape on one where I ran something over and took the silver paint off. I'd say go for the flowmasters, but if you wanna be LOUD, get single chamber dynomax race mufflers!

-Matt
 

Stangfreak95

add a 4
Founding Member
Nov 4, 2002
3,571
0
0
In your sister. If none, your mom
Nov 7, 2004
#23
  • Nov 7, 2004
  • #23
matthiasj said:
Lets get back on topic here...i didnt know that most off road h's came in pieces...it i tighen the bolts like they should be, will it be ok?? And WHERE CAN I BUY A FLOWMASTER CAT-BACK?? I cant find very many dealers that feature an american thunder catback for a 94-95. ALSO, i have a guy in town that is awesome with exhaust, he has alumanized steel, and benders and such, and could fab up me an exhaust. Would this be the route to go? Just get new tips, and mufflers welded in my stock exhaust with a custom made H-pipe or something? if i take out the cats, and weld in pipe, will it be any different than a 2.5 pipeing, with 2.25???
Click to expand...

You can buy a catback at SUMMIT Racing. Here's the direct LINK for you directly to the catback.

That one has 2 1/2 catback W/stainless steel tips. This is the American Thunder catback.

Here's a directLINK to that catback on Flowmaster's website.

You have the choice to not have the stainless tips but I highly recommand you get them.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Nov 7, 2004
#24
  • Nov 7, 2004
  • #24
Is it that bad to get an H-pipe that comes in pieces?? I'd like to get the cheapest i can get.
 
E

EpiKk3

New Member
Jun 4, 2004
405
0
0
Nov 7, 2004
#25
  • Nov 7, 2004
  • #25
Stangfreak that sounds great man.. I want exhaust pretty bad.. but Ima have to wait for christmas.. the only thing I'm worried about rather than it sounding crappy is sounding to loud and droning.. I don't want to have to blow my speakers on a monthly basis to hear my mp3s.. I dont want to get yelled at by the neighbors.. too much .. and I wanna be able to hear my gf on dates lol .. getting gains from it isn't too big a priority for me..

I'll probably end up going with just the catback for now.. seeing how that sounds.. whether or not its loud enough, then go H / X pipe.. I know if I end up getting a new pipe it'll be a waste of $ but .. probably what I'll do

http://www.exhaustpower.com/product...id/35?osCsid=457f5d61b825f3063a19e56234798a2f
^seems like a good site
 

GRGT1994

New Member
Sep 22, 2004
1,034
0
0
Nov 7, 2004
#26
  • Nov 7, 2004
  • #26
I got my American Thunder cat-back from Jegs. Very fast delivery, and no complaints. They have the H pipe too (for 94-95), but I haven't added that yet.

Been running the set for 3 months now and no rust.
 

cobra dave

New Member
Sep 1, 2003
308
0
0
Nov 7, 2004
#27
  • Nov 7, 2004
  • #27
if your looking for the loudest meanest exhaust look no further than a Bassani mid to one chamber flows. I know everyone is gonna say you cant use chambered muffs with an x but i learned to get past the drone. This was in my 96 cobra. Right now on my 95 i have bbk longtubes a shorty h and original 40 flows which is meaner than hell at WOT but not my kind of sound i'm an x freak. My x pipe should be here next week to replace the h. Anyone want a slightly used shorty H?
 
1

1hot5.0

Founding Member
Sep 6, 2002
1,615
0
0
Surprise, Arizona
Nov 7, 2004
#28
  • Nov 7, 2004
  • #28
cobra dave said:
if your looking for the loudest meanest exhaust look no further than a Bassani mid to one chamber flows. I know everyone is gonna say you cant use chambered muffs with an x but i learned to get past the drone. This was in my 96 cobra. Right now on my 95 i have bbk longtubes a shorty h and original 40 flows which is meaner than hell at WOT but not my kind of sound i'm an x freak. My x pipe should be here next week to replace the h. Anyone want a slightly used shorty H?
Click to expand...

If you could post a video when you get your x-pipe on that would be great.
 
G

grrrrrrr

New Member
May 20, 2003
289
0
0
norfolk, VA
Nov 8, 2004
#29
  • Nov 8, 2004
  • #29
I've got your typical mac exhaust and it sounds good and was fairly cheap. No rust that I've seen, had the mufflers for about 3 years, h about 1 year.. only had the headers for about 3 months, but I doubt they'll rust...
 
M

mackey

Active Member
Jan 25, 2003
1,284
1
38
Beverly, Massachusetts
Nov 8, 2004
#30
  • Nov 8, 2004
  • #30
I have had my flowmasters for about 6 months now and over a summer, the welds that the hangers are attached to are starting to rust. Keep in mind I have stainless steel tips and the welds that hold the actual stainless tips to the hangers are rusting... Bought the system for $250 new. American thunder Stainless steel 2.5" tips.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Nov 8, 2004
#31
  • Nov 8, 2004
  • #31
I'm pretty sure i'm sold on an Off-Road H and an American Thunder cat-back. I'll probably install it myself, with the help of my dad, because there arent any exhaust shops that will mess with the cats around here. If i have enough money when christmas comes around, i might get an off-road X pipe. Or keep the the off road H with shorty headers.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Nov 8, 2004
#32
  • Nov 8, 2004
  • #32
I've been thinking about a Magna Flow, or a Mac Cat-back. I know the flowmaster sound, i just want someting a little more agressive and different. Would a magna-flow or mac get me that??
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
208
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
B
Airaid reduction sleeve?
  • BriansNSane
  • Dec 20, 2025
  • SN95 4.6L Mustang Tech
Replies
0
Views
157
SN95 4.6L Mustang Tech Dec 20, 2025
BriansNSane
B
D
Fuel pump upgrade
  • dkrupp79
  • Jul 7, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
283
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 10, 2025
Scrapla347
B
Saying Hi
  • BriansNSane
  • Dec 20, 2025
  • The Welcome Wagon
Replies
5
Views
328
The Welcome Wagon Dec 21, 2025
BriansNSane
B
Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
369
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?