• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

flywheel position problem

  • Thread starter Thread starter gotta2s
  • Start date Start date Sep 16, 2005
G

gotta2s

New Member
Sep 16, 2005
1
0
0
turlock
Sep 16, 2005
#1
  • Sep 16, 2005
  • #1
i bought a centerforce clutch for my 93 mustang gt. i had the flywheel resurfaced, and when i put it back on i noticed a weight on one side. i didnt pay to much attention to it. now my car rattles quite a bit, mainly from the shifter. i had also put a drive shaft from a 98 mustang cobra. i have already taken that to be ballanced thinking that might be the problem but no success. now im thinking its the weight on the flywheel causing it. i was told there is only one way the flywheel will bolt up due to the bolt pattern and thought i just got lucky on the first try. reciently someone else told me differently but they wernt sure which way the weight needed to go. if anyone knows which way to properly mount the flywheel i would greatly appreciate the info.
thanks.
 
J

Jack's95gt

Member
Aug 15, 2004
443
1
18
Huntingdon Valley, PA
Sep 16, 2005
#2
  • Sep 16, 2005
  • #2
Your flywheel will only bolt up to your crankshaft in the proper position. The bolt holes are spaced differently for this purpose. It could be your drive shaft to rear yoke position. It could be any of four possible ways. Change it until the vibration gets better.
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
Sep 16, 2005
#3
  • Sep 16, 2005
  • #3
Flywheel will only go on one way. I always torque and use loc-tite on the flywheel bolts and pressure plate bolts. I had a pressure plate come loose on me and it caused all sorts of vibrations.
 
You must log in or register to reply here.

Similar threads

P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
296
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
J
Suspension Foxbody mustang Steering shaft issue
  • Jakub2537
  • Sep 5, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
332
Fox 5.0 Mustang Tech Sep 11, 2026
gkomo
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
562
Other Auto Tech Mar 3, 2026
Noobz347
D
Pressure plate problems
  • david66
  • Feb 26, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
230
1965 - 1973 Classic Mustangs -General/Talk- Feb 27, 2025
Realmongo
M
Idle control problems
  • miser143
  • Aug 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
206
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 29, 2026
DadLife0724
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?