Foglight lens fell off...

[MikeC]

The lens for one of my fog lights fell off. The bulb and housing are still on the car. Is there a glue I can use to re-attach it?

 

[Henceforward]

Here is what I did, being that they both fell off within a few days of eachother I got serious about it and fixed it for good.

1. Remove the bracket including the lense housing
2. Remove the lense housing
3. Remove the grey hard plastic epoxy with an xacto knife
4. Sand the edge of the housing
5. Do not use windex on the mirror finish, it will melt off
6. JB Weld the glass lense to the housing.
7. Tie it secure with nylon braided packing tape religiously (Tightly Too)
8. Let set to dry a few days.
9. Reinstall the bracket, and aim the lenses.

Here is an aiming guide.

http://www.tirerack.com/accessories/lighting_tech/techpage.jsp?techid=130&currentpage=130

 

[MikeC]

Thanks, I'll give that a try!

 

[Roland69]

my car has tractor lights for fog's....nobody has noticed untill I mention it.

 

[Roland69]

my tractor fog lights lol