Here is what I did, being that they both fell off within a few days of eachother I got serious about it and fixed it for good.
1. Remove the bracket including the lense housing
2. Remove the lense housing
3. Remove the grey hard plastic epoxy with an xacto knife
4. Sand the edge of the housing
5. Do not use windex on the mirror finish, it will melt off
6. JB Weld the glass lense to the housing.
7. Tie it secure with nylon braided packing tape religiously (Tightly Too)
8. Let set to dry a few days.
9. Reinstall the bracket, and aim the lenses.