• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Foglights Short out my Healights, help!?

  • Thread starter Thread starter tuxedokman83
  • Start date Start date Jun 18, 2005
T

tuxedokman83

New Member
May 30, 2005
1
0
0
Lockport, IL
Jun 18, 2005
#1
  • Jun 18, 2005
  • #1
Whenever I turn on the foglights at night with my headlamps after about 5-10 min the headlights turn off, if i turn off the fog switch they come back on. Does anybody know how to fix this or could give me a link to parts/wiringdiagrams procedures on how to fix the short. Thanks much
-mark
email me at tuxedokman83@yahoo.com if possible
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
Jun 18, 2005
#2
  • Jun 18, 2005
  • #2
that's a very common problem w/ the gt's and foglights. You need to do the gt foglight fix and it will be fine. Let me see if I can find the link for ya.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 18, 2005
#3
  • Jun 18, 2005
  • #3
SEE http://www.corral.net/tech/maintenance/foglights.html to fix the problem. The stock wiring isn't up to the job and is overheating. The headlight switch & turn/multifunction switch are affected by Ford's wiring problem. Sometimes it overheats so badly that the plastic shells of the wiring connectors start to melt.
 

ram360

Founding Member
Oct 19, 2002
2,162
1
59
Pennsylvania
Jun 18, 2005
#4
  • Jun 18, 2005
  • #4
http://www.mustangworks.com/articles/electronics/fog-quick.html
 

Paully's5.0

Founding Member
Jun 3, 2000
495
1
19
WI
Jun 18, 2005
#5
  • Jun 18, 2005
  • #5
I just put relays in the circuit and then took power directly from the battery (added fuses of course). Did this with my high, low, and foglights. I think relays are a better solution than the corral write up. Don't have to go under your dash, just open up the hood.


EDIT: This setup actually saved me a little, I just recently put new bulbs in my foglights, well one of the wires for the bulb was pinched causing my foglight fuse to blow, this was a much easier fix and may have saved my headlight switch from getting toasted.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 18, 2005
#6
  • Jun 18, 2005
  • #6
Paully's5.0 said:
I just put relays in the circuit and then took power directly from the battery (added fuses of course). Did this with my high, low, and foglights. I think relays are a better solution than the corral write up. Don't have to go under your dash, just open up the hood.


EDIT: This setup actually saved me a little, I just recently put new bulbs in my foglights, well one of the wires for the bulb was pinched causing my foglight fuse to blow, this was a much easier fix and may have saved my headlight switch from getting toasted.
Click to expand...

I did pretty much the same thing, only I just did the foglights. I used 12 gauge wire, which made it possible to use 100 watt bulbs if I ever decided to upgrade from the stock 55 watt bulbs.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 18, 2005
#7
  • Jun 18, 2005
  • #7
Paully's5.0 said:
I just put relays in the circuit and then took power directly from the battery (added fuses of course). Did this with my high, low, and foglights. I think relays are a better solution than the corral write up. Don't have to go under your dash, just open up the hood.
Click to expand...
I have mine exactly the same way. I have the relays and sockets on the driver strut tower area. I will note that people who live in climates with a winter or lots of moisture might not want to do this (having the relay inside the car is nice from an nice-environment standpoint). I live in the desert, so it does not matter. Keep a spare relay in the glove box, and .

I like it because it takes a LOT of stress off the switchgear - MF switches are pricey, it arguably gets more power to the bulbs, etc.

Good luck.
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Jun 18, 2005
#8
  • Jun 18, 2005
  • #8
I did the Corral fix years and years ago and I thought it was easy and worked well. I'd probably do it again if I had another GT.
 
You must log in or register to reply here.

Similar threads

1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
627
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
K
Electrical Weird horn - headlight issue
  • Kuwait-Foxbody
  • May 27, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
810
Fox 5.0 Mustang Tech May 28, 2024
Noobz347
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
521
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
890
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
P
Fox Opinions Wanted- at a crossroad with my '88 GT
  • pindude80
  • Apr 18, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 22, 2025
pindude80
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?