ford racing balancer on a 347

C

cctinnell

New Member

Jan 27, 2004

135

0

0

Arkansas

Nov 29, 2005

#1

• Nov 29, 2005

• #1

i am trying to install a new ford racing balancer on my 347 that i got from another car. the old balancer i did not think was of the quality of the ford racing so i bought the new one, my question is would the ford racing balancer hit the water pump? i can see where the person who owned the motor before me grinded off part of the water pump, but it still looks like the balancer is hitting when i try to put it on. oh yea and by the way i cant get the balancer to go on all the way. PLEASE HELP

 

P

proxses

Founding Member

Dec 12, 2000

620

0

0

Dayton, Oh

Nov 30, 2005

#2

• Nov 30, 2005

• #2

Normally the balancer will not slide on by its self. There are balancer install kits that pull it into place.
Some people have gotten away with pushing or tapping it on far enough so that the retaining bolt can be used to pull it the rest of the way.
As far as hitting the waterpump, that does not sound right. The balancer would have to be pretty oversized to hit the waterpump. It should clear.
Also, did you check the counterbalance of the Ford Racing unit to make sure it matches the one you are pulling off?

 

C

cctinnell

New Member

Jan 27, 2004

135

0

0

Arkansas

Nov 30, 2005

#3

• Nov 30, 2005

• #3

it just looks to me like it was hitting the water pump and i could not get the balancer to go on far enough to get the bolt started.

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,026

1,617

194

NJ

Nov 30, 2005

#4

• Nov 30, 2005

• #4

You need the FMS spacer to go with the balancer to make it work.
Like $35.

 

D

darrellk

New Member

Jun 19, 2006

23

0

0

Nov 22, 2006

#5

• Nov 22, 2006

• #5

this will fix the problem, and this will work on a 94, the spacer i mean