• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fox Body Motor Mounts

  • Thread starter Thread starter FoMoCo17
  • Start date Start date Jul 12, 2011

FoMoCo17

Member
Apr 1, 2011
188
3
18
Jul 12, 2011
#1
  • Jul 12, 2011
  • #1
Does anybody recall if the stock motor mounts on a Fox body Mustang have a built-in separation safety rivet or device as opposed to 60's/70's motor mounts that were just bonded rubber to metal? I forgot to check the last time I was under the car but definitely do not want to dent my hood! ouch! Or are the two metal plates interwoven to prevent them from separating?
 

4rdnut

Member
Dec 14, 2010
188
1
16
Jul 12, 2011
#2
  • Jul 12, 2011
  • #2
Get the energy suspension poly motor mounts, i just replaced my original mounts in my 90 gt and they had what looked like a small rubber donut connected with a rivet that was loose and broken which was supposed to prevent separation. The energy suspension mounts made a world of difference on my engine. I also got the es poly trans mount that replaced my flimsy broken oem trans mount. competition engineering also makes an engine torque link for fox body mustangs that mounts using your sway bar frame bolts and bolts to the cylinder head so the engine won't pop the hood.
 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"
15 Year Member
Nov 29, 1999
14,679
424
154
Boca Raton, Florida
Jul 12, 2011
#3
  • Jul 12, 2011
  • #3
Neither stock or aftermarket come apart. They are bonded to metal.

We just picked up the Energy kit which included (2) Motor Mounts & (1) Tranny Mount.



 

Attachments

  • IMAG0098.webp
    33.3 KB · Views: 529
  • IMAG0099.webp
    12 KB · Views: 622

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Jul 12, 2011
#4
  • Jul 12, 2011
  • #4
The Energy Suspension poly mounts along with a few other poly mounts slightly raise the motor...

The best stock replacement mounts are from a 93 Mustang Convertible which slightly lower the motor, and have complete bonded shells.
 

MFE92

10 Year Member
Aug 25, 2010
1,094
373
124
Phoenix
Jul 13, 2011
#5
  • Jul 13, 2011
  • #5
Rick 91GT said:
The Energy Suspension poly mounts along with a few other poly mounts slightly raise the motor...
Click to expand...

No...the Prothane mounts raise the motor, especially on 91+ cars that all came with the lower, "convertible" style mounts from the factory, because the Prothanes mimic the older hardtop style, which is taller. And also not fully encapsulated, so yes, they can come apart. The Energy Suspension mounts mimic the encapsulated convertible style mounts that came on 87-93 convertibles and all hardtops from 91-93, and they'll lower the engine on '90 and older hardtop that came with the old hardtop style mounts.
 

YardSpecial

New Member
Mar 20, 2003
2,664
0
0
MT
Jul 13, 2011
#6
  • Jul 13, 2011
  • #6
FACT is no matter the mount ALL stock FAIL and eat the fan blades. Energy is the best period. I installed mine in 2002 and LOVE them !!


Just sayin..............
 

FoMoCo17

Member
Apr 1, 2011
188
3
18
Jul 13, 2011
#7
  • Jul 13, 2011
  • #7
Now I'm thoroughly confused. When I said bonded, I meant the old style that just had a piece of rubber between to metal shells. When they broke, the rubber bond to the metal separated and the engine could rise up. If the 1990 mounts are riveted somehow, then they are not of the so-called bonded type because they have a connection in case of failure. This is what I really was asking?

Also, in the future, I do want to put in urethanes but co not nor cannot raise the motor so which urethane manaufacturer would be the best to go to and just get them for a 1990 Mustang GT? Or is another year in order here because you guys are in the know? I do not mind lower it but definitely do NOT want to raise it. As always THANKS!
 

MFE92

10 Year Member
Aug 25, 2010
1,094
373
124
Phoenix
Jul 13, 2011
#8
  • Jul 13, 2011
  • #8
FoMoCo17 said:
Also, in the future, I do want to put in urethanes but co not nor cannot raise the motor so which urethane manaufacturer would be the best to go to and just get them for a 1990 Mustang GT? Or is another year in order here because you guys are in the know? I do not mind lower it but definitely do NOT want to raise it. As always THANKS!
Click to expand...

Energy suspension mounts will not raise the engine. If anything, they'll lower it slightly.
 

FoMoCo17

Member
Apr 1, 2011
188
3
18
Jul 15, 2011
#9
  • Jul 15, 2011
  • #9
Do stock engine mounts have a built in safety feature to keep them from completely separating?
 

Gearbanger 101

Straight Outta Locash
20+ Year Stangneter
Aug 10, 2002
9,457
1,377
234
Ontario, Canada
Jul 15, 2011
#10
  • Jul 15, 2011
  • #10
Why does it matter? If you're making enough power to separate a set of new engine mounts of any brand, my hats off to you.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jul 15, 2011
#11
  • Jul 15, 2011
  • #11
If you are worried, get solid mounts, but the sort of failure you are describing isn't common with your typical 5.0-based combo. You have 3 points supporting the engine/trans, so tearing one won't lead to catastrophic failure. It's definitely an inspection item that you should take a peek at when you routinely look items over under the hood.
 
Last edited: Nov 16, 2020
You must log in or register to reply here.

Similar threads

J
Suspension Motor mounts sagging and broke rack
  • junkyardjeff
  • Aug 12, 2018
  • Fox 5.0 Mustang Tech
Replies
1
Views
1K
Fox 5.0 Mustang Tech Aug 12, 2018
jrichker
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Timing Cover/harmonic Balancer Removal And Replacement
  • jrichker
  • May 28, 2017
  • Fox 5.0 Mustang Tech
Replies
1
Views
16K
Fox 5.0 Mustang Tech Jul 6, 2024
Noobz347
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
Taurus Fan And Fal 33054 Install On A Fox
  • No.11
  • Oct 4, 2016
  • Fox 5.0 Mustang Tech
Replies
8
Views
5K
Fox 5.0 Mustang Tech Oct 11, 2016
MFE92
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?