I'm new to the mustang game, and picked up a 93 lx recently. No motor or trans. Piecing everything together right now. Does anyone know if swapping an 88 5.0 t5 setup in the car would cause any problems with wiring or if it would just drop in?
I'll move your thread over to the '79-'95 tech subforum. You'll get help there. You might change the title to a shortened version of this problem. That'll help draw in the right people to help you.
Was the car originally an auto or manual will be asked early on. Different computers for them.
No major changes occurred in the drivelines for 87-93, so you could take the mechanical engine and trans from a 1993 and put it into a 1987. You would just keep the wiring, ECU, etc from the host car.
No major changes occurred in the drivelines for 87-93, so you could take the mechanical engine and trans from a 1993 and put it into a 1987. You would just keep the wiring, ECU, etc from the host car.
Yes, thats why you keep the wiring from the car you took the motor from, there are some differences with o2 wires too, one of the ' experts' will chime in and help you out, you do have access to the car the engine was pulled from?
Ah yes, that's the one watchout. Need to check the door tag to confirm original car was a 5spd 5.0 car as all. If it's a 2.3L a4ld car, you'll need different wiring and ECU
But enginewise I see the question posted about taking an 87-88 speed density motor and dropping it in a 89-93 original 5.0. That sort of swap is mechanical the same.