• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fox Mustang Headlights

  • Thread starter Thread starter Billy1234
  • Start date Start date Aug 23, 2017

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 23, 2017
#1
  • Aug 23, 2017
  • #1
Not sure which headlights to get. one is about $50 cheaper than the other one and I don't know if either of them will give me issues or if the cheaper one is lower quality.
https://lmr.com/item/SDT-13007A/1987-93-Mustang-Smoked-One-Piece-Headlight-Pair
or
Amazon product ASIN B016RX1GSSView: https://www.amazon.com/dp/B016RX1GSS/ref=twister_B00ZWMCJXM?_encoding=UTF8&psc=1
 

Ryuk

I love your drawers
5 Year Member
Apr 22, 2017
1,718
1,657
133
Aug 23, 2017
#2
  • Aug 23, 2017
  • #2
The Amazon ones look darker. Depending on your headlights that could be an issue. What color car?
 

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 23, 2017
#3
  • Aug 23, 2017
  • #3
blue
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Aug 23, 2017
#4
  • Aug 23, 2017
  • #4
The one piece headlights look like garbage in person because they just don't fit right. Buy three peice OEM style and if you want the projector look there is a thread about how to accomplish it on this forum.
 
Reactions: BlakeusMaximus, DSB88GT and Nutty 5.o

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Aug 23, 2017
#5
  • Aug 23, 2017
  • #5
Agree 100%. The once piece look....cheap.
 
Reactions: Mstng93SSP and DSB88GT

Jersey Joe

I remember blowing that Monkey's ass
10 Year Member
Nov 29, 1999
767
1,319
154
Bloomingdale N.j.
Aug 25, 2017
#6
  • Aug 25, 2017
  • #6
One piece look right on very few cars, better off with three piece in my opinion.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Aug 25, 2017
#7
  • Aug 25, 2017
  • #7
For the love of all humanity,,,,,,,,,,,,no
 

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 25, 2017
#8
  • Aug 25, 2017
  • #8
I ended up getting a 3 piece smoked headlight
 
Reactions: 92Apocalypso, Mustang5L5 and 90sickfox

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Aug 26, 2017
#9
  • Aug 26, 2017
  • #9
Billy1234 said:
I ended up getting a 3 piece smoked headlight
Click to expand...

I would check with others that have them. You may not like them at night.
 

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 26, 2017
#10
  • Aug 26, 2017
  • #10
I did the smoked ones I got are good for night but the ultra smoked headlights are supposedly bad
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 27, 2017
#11
  • Aug 27, 2017
  • #11
Billy1234 said:
I did the smoked ones I got are good for night but the ultra smoked headlights are supposedly bad
Click to expand...
Ether way, smoked headlight lenses are illegal for street use. There should have been a legal disclaimer stating they were for "show car use only, not for street driven cars".


Aftermarket headlight lens kit - It took about 7 days to get the lenses, 20 minutes per side to install all 3 lenses and forever to try to align them.

I drove around for several days with the driver’s side headlight scanning the upper branches of trees for squirrels, owls and UFO’s. The headlight lens had extra slack between the retaining clip and the screw head which allowed the lens to shift around. I fixed that with some small washers between the screw heads and the bottom of the mounting hole. I would recommend that you find 2 extra adjustment screws per side - they are the ones with the hex ends on the end of the screw where it sticks through the mounting plate. That may help the alignment problems, as the stock setup only allows adjustment with 2 screws, and is hard to adjust in and down at the same time.

If you bought Genuine Ford headlights, the adjustment will be easy. If you bought reproduction headlights, they will be very difficult to align properly. I bought reproduction units the first time, and my headlights could not be aligned: they would shine up in the trees and across the road. I even had all 3 screws set up as adjustment screws.

The set of headlights I now have say "Ford" on them and they seem to line up properly.

The adjustment screws are upper inside and lower outside screws. If the headlights were re-assembled properly, they will have a 5/32" hex on the screw. You can use a 1/4" ratchet with a 5/32" socket. The upper screws can be reached with the hood up, while the lower screws may require you to lie on the ground in front of the car and reach them from the bottom.

To align the headlights, find a level spot with a wall 25-30 feet away. Disconnect the driver light and align up the passenger light so that the light pattern is slightly below of the actual centerline of the headlight. This is to illuminate the right hand side of the road. Reconnect the driver light and disconnect the passenger light. The driver light should be aimed so that the light pattern on the wall is inward about 6" and slightly below the centerline of the headlight. This keeps you from blinding the oncoming cars. Disconnecting and reconnecting the headlights helps to show which headlight is shining in what direction. Reproduction headlights may shine in several directions at the same time, making it very difficult to align them if both lights are on at the same time

One Stangnetter recommends putting a fender cover over the headlight that isn't being aligned. I like his idea, it's simpler than disconnecting the lamps.
 
Reactions: General karthief

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Aug 27, 2017
#12
  • Aug 27, 2017
  • #12
I had the smoked lamps. Light output at night sucked, but I never drove the car at night. I know they are illegal but cops and the inspection station never cared.


However, now I have OEM now lights on the car. I just prefer the OE look
 
Reactions: fredfifty and 92Apocalypso

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 27, 2017
#13
  • Aug 27, 2017
  • #13
The sve smoked headlights say they are DOT legal, so I don't think they are illegal to use
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Aug 27, 2017
#14
  • Aug 27, 2017
  • #14
Billy1234 said:
The sve smoked headlights say they are DOT legal, so I don't think they are illegal to use
Click to expand...


https://lmr.com/item/LRS-13007SM-KIT/87-93-Mustang-Smoked-Headlight-Kit

Scroll to near bottom. Says NOT DOT legal
 

Billy1234

Member
Jul 31, 2017
14
6
23
Aug 27, 2017
#15
  • Aug 27, 2017
  • #15
I got these look it says they are
https://lmr.com/item/LRS-13007SMA/mustang-smoked-headlight-kit-sve-87-93
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Aug 27, 2017
#16
  • Aug 27, 2017
  • #16
Hmm..I like those
 

Billy1234

Member
Jul 31, 2017
14
6
23
Sep 7, 2017
#17
  • Sep 7, 2017
  • #17
Here is wat it looks like
 

Attachments

  • IMG_0416.webp
    657 KB · Views: 340
  • IMG_0417.webp
    704.4 KB · Views: 303
Reactions: 90sickfox and General karthief

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Sep 7, 2017
#18
  • Sep 7, 2017
  • #18
That looks pretty good.
 

fredfifty

5 Year Member
Nov 23, 2011
318
57
59
SF Bay Area
Sep 13, 2017
#19
  • Sep 13, 2017
  • #19
use oe rubber healight seals if possible, the LRS ones are so stiff that they dont seat right (from my experience)
 
You must log in or register to reply here.

Similar threads

1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
485
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
510
Other Auto Tech Oct 23, 2026
JH96GT
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
F
Need some help with LED conversion on 04 GT
  • FATTS_DC
  • Feb 10, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
773
1996 - 2004 SN95 Mustang -General/Talk- Apr 24, 2025
stormsedge
P
Fox 17" Deep Dish Bullitts on Rear of Fox, 275/40/17?
  • pindude80
  • May 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
920
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 4, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?