Quick Pony Member Nov 28, 2002 129 0 16 Pensacola, Florida Jun 26, 2010 #1 Jun 26, 2010 #1 I am going to replace the fuel filter on my 1991 LX 5.0 convertible. When I pull the hoses off each end of the current fuel filter is gas going to start flowing out the hoses? Thanks Larry
I am going to replace the fuel filter on my 1991 LX 5.0 convertible. When I pull the hoses off each end of the current fuel filter is gas going to start flowing out the hoses? Thanks Larry
bigvino Member Mar 22, 2010 259 1 19 Corpus Christi, TEXAS Jun 26, 2010 #2 Jun 26, 2010 #2 yea just a little bit... make sure you point the hose upward to the sky...therefore you will have minimal leakage
yea just a little bit... make sure you point the hose upward to the sky...therefore you will have minimal leakage
JRoush Founding Member Jul 23, 2001 179 2 18 Kansas Jun 26, 2010 #3 Jun 26, 2010 #3 And let the car sit for awhile before you do it to alleviate the fuel pressure.
H Haus Member Jul 20, 2005 408 0 16 Jun 26, 2010 #4 Jun 26, 2010 #4 or you can just pull up the inertia switch's red button in the left side trunk area, start your car, wait for it to die and do it that way to relieve the pressure
or you can just pull up the inertia switch's red button in the left side trunk area, start your car, wait for it to die and do it that way to relieve the pressure
Shakerhood 20+ Year Stangneter Oct 28, 2004 3,361 211 114 Ohio Jun 26, 2010 #5 Jun 26, 2010 #5 I always put some vacuum caps on the filter itself to keep fuel leakage to a minimum.