fuel pressure gauge

G

greg@berkeley

Founding Member

Aug 30, 2002

1,172

0

0

minnesota / university of california, berkeley

Mar 12, 2004

#1

• Mar 12, 2004

• #1

can anyone tell me what size adapter i'll need for a jeg's fuel pressure gauge? the gauge has a 1/8" NPT male end.

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Mar 12, 2004

#2

• Mar 12, 2004

• #2

The fitting on the fuel rail is 1/16".... Or so I have been told

 

GTJake

Founding Member

Oct 28, 2002

3,049

0

56

Ann Arbor, MI

Mar 12, 2004

#3

• Mar 12, 2004

• #3

Just call them and I bet they can tell you. I'd tell you the part number, but the invoice is back home.

Jake

 

G

greg@berkeley

Founding Member

Aug 30, 2002

1,172

0

0

minnesota / university of california, berkeley

Mar 12, 2004

#4

• Mar 12, 2004

• #4

jake, i tried that first. they said that the didn't have any thread size specs, so they couldn't help me.

does anyone know the size for certain?

thanks

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

Mar 12, 2004

#5

• Mar 12, 2004

• #5

Autometer part #3280 is the adapter that you need. The fuel rail is 1/16 NPT, according to the searching I did yesterday (on Stangnet). It was also said that local hardware stores don't have this sized fitting, so save the time and just order the autometer adapter.

I don't know what kind of quality the JEGS gauge is, but an autometer 2173 sells for about $30.00 from Summit (part# ATM-2173). The adapter is about $8.00 (ATM-3280).


Rick

 

GTJake

Founding Member

Oct 28, 2002

3,049

0

56

Ann Arbor, MI

Mar 12, 2004

#6

• Mar 12, 2004

• #6

Greg you can prolly get that adapter at your local NAPA, at least they did by me....after I spent the $10 for it through Jegs

Jake

 

G

greg@berkeley

Founding Member

Aug 30, 2002

1,172

0

0

minnesota / university of california, berkeley

Mar 12, 2004

#7

• Mar 12, 2004

• #7

GTJake said:

Greg you can prolly get that adapter at your local NAPA, at least they did by me....after I spent the $10 for it through Jegs

Jake

Click to expand...

yeah, i'm not going to pay $8 for a part and then another $8 for shipping and handling.

i'll check out napa when i get home. thanks for the info, rick!

 

95GTeee

New Member

Mar 9, 2004

181

0

0

Western CT

Mar 12, 2004

#8

• Mar 12, 2004

• #8

If you do get the part number from NAPA ... can you please post the part #?? Is it OK to leave the gauge on the rail permanently? It mounts right a the Schrader (SP?) valve, right? Thanks!

 

G

greg@berkeley

Founding Member

Aug 30, 2002

1,172

0

0

minnesota / university of california, berkeley

Mar 14, 2004

#9

• Mar 14, 2004

• #9

yeah, i'll post the napa part # if they have it. i will be mounting the gauge on the schrader valve. i don't think there's any reason not to leave it on permanently...