• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fuse #18, what gives?

  • Thread starter Thread starter stangzroastrice
  • Start date Start date Jun 15, 2006

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 15, 2006
#1
  • Jun 15, 2006
  • #1
I've never had this problem up until recently, I got pulled over the other day and shut off my car for the cop. Well after going through all the BS I start my car and realize that my instrument cluster illuminations work, but the tach, oil pressure, temp, voltage, and fuel gauge all do not function. So ok, I realize the next day Fuse #18 was blown, so I replaced it. Gauges work when I put the key into the position where the fuel pump primes but right when I start the car, it blows again. Replaced it 3 times now, does it everytime when I start the car. How could this just happen out of nowhere? Any input?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 15, 2006
#2
  • Jun 15, 2006
  • #2
You might have to just disconnecting things and seeing if it doesnt blow when it otherwise would. Or disconnect everything and hook things back up till it blows (this can be more work but uses less fuses).

Someone might know what's a likely cause to blow your fuse (good thing to check first). I dont.

Good luck.
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 15, 2006
#3
  • Jun 15, 2006
  • #3
ttt
 
B

brothergoat5

New Member
Sep 11, 2005
26
0
0
Jun 15, 2006
#4
  • Jun 15, 2006
  • #4
Check the ground strap under the steering wheel. It should be right next to the console under the steering wheel. Its like a 10 gauge black wire. That is a junction point for alot of the interior electronics.
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 15, 2006
#5
  • Jun 15, 2006
  • #5
thanks ill check that out tomorrow when its light, any more input will be greatly appreciated
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 16, 2006
#6
  • Jun 16, 2006
  • #6
ground was fine
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 16, 2006
#7
  • Jun 16, 2006
  • #7
disconnected the wiring from the instrument cluster, still blows the fuse right on start ... got to be something with the ignition?
 

stangzroastrice

Founding Member
Aug 5, 2002
278
0
16
Belmar, NJ (Jersey Shore)
Jun 16, 2006
#8
  • Jun 16, 2006
  • #8
ttt
 
You must log in or register to reply here.

Similar threads

J
Fox Lost all gauge cluster function after Holley Terminator X install (solved)
  • Justin17383
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
278
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 13, 2026
2000xp8
C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
253
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
8
Grounding issue?
  • 86SilverFox
  • May 16, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
259
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 31, 2026
86SilverFox
8
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
246
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?