• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Gas Cap Leak

  • Thread starter Thread starter ohyaa
  • Start date Start date Jun 23, 2011
O

ohyaa

Member
May 27, 2004
42
0
6
Henderson, NV
Jun 23, 2011
#1
  • Jun 23, 2011
  • #1
On my 67 I installed a new reproduction twist on gas cap and related filler parts and gaskets. Last night after filling the tank, was parked in the driveway and noticed a strong fuel smell. Seems the gas was leaking out of the cap. I doubt it should be leaking like this.

Is there a way to make the seal tighter with cap I already have? Do the pop-open caps with the smaller twist cap underneath seal better? Other suggestions?
 
2

2+2GT

10 Year Member
Apr 25, 2009
3,333
10
79
Southeastern Pennsylvania
Jun 23, 2011
#2
  • Jun 23, 2011
  • #2
Having driven these cars since the early 70's, I can tell you ya just don't fill the filler pipe.
 

robbz28

10 Year Member
Sep 23, 2009
775
5
39
Epps, LA
Jun 23, 2011
#3
  • Jun 23, 2011
  • #3
What brand gas cap did you buy? I have heard lots of bad things about Scott Drake gas caps....I don't know personally, was just researching before buying some stuff....anyway 2+2 is more than likely right....just try not to fill it all the way to the top. Also...do you have a steel divider behind your back seat? if not might be a good idea to purchase one...might help keep smells located in the trunk area and also keep you from catching on fire in case you get rear-ended
 
O

ohyaa

Member
May 27, 2004
42
0
6
Henderson, NV
Jun 24, 2011
#4
  • Jun 24, 2011
  • #4
The cap is a Scott Drake brand. Does someone else make a good, no-leak part? Do the internal caps used in the pop-open versions seal better?

I don't have the divider plate. There are too many other factory holes in the package tray and around the rear wheel wells to also let smells in.
 

robbz28

10 Year Member
Sep 23, 2009
775
5
39
Epps, LA
Jun 24, 2011
#5
  • Jun 24, 2011
  • #5
Get a divider plate! Just for safety if nothing else. Im not sure about any of the other stuff...i have an original pop open style and I ended up restoring it instead of getting a new one.
 

tx65coupe

Active Member
Nov 29, 1999
1,551
1
37
Jul 7, 2011
#6
  • Jul 7, 2011
  • #6
What mine does is when its full or close to it, it will actually slosh and spill on the bumper under hard acceleration. I too have all new filler neck and cap parts.
 
You must log in or register to reply here.

Similar threads

My stinky friction modifier story
  • nicholase
  • Jan 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
809
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 6, 2025
BlakeusMaximus
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
383
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
884
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
2001 Mustang GT -- Valve Assembly Pressure Regulator Solution Found!
  • SN95_fanx54
  • Aug 17, 2024
  • SN95 4.6L Mustang Tech
Replies
7
Views
3K
SN95 4.6L Mustang Tech Oct 23, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?