Gas tank/filler neck gasket

roush 97

New Member

Aug 28, 2003

86

0

0

Illinois

Mar 30, 2004

#1

• Mar 30, 2004

• #1

Does the tank have to be dropped to replace the rubber gasket between the tank and filler neck. I crawled under there and could get right at it, but is there enough give in the filler neck once taken loose to get this done? It's no problem if I have to drop the tank, I was just looking for a way to save the hassel.

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Mar 30, 2004

#2

• Mar 30, 2004

• #2

no i think you have to looesn the couple of bolts holding the neck and the 2 holding the straps and bring it down and just put in a new rubber gasket. i never did when i dropped my fuel tank it was still real tight? so i left it your should still be fine?

 

M

mustangrfast88

Founding Member

Sep 22, 2002

330

0

0

middletown ohio

Mar 30, 2004

#3

• Mar 30, 2004

• #3

sorry to say yuo have to drop the tank and that aint no biggy and well there i would put a new pump and sending unoit in there well you are at it

 

roush 97

New Member

Aug 28, 2003

86

0

0

Illinois

Mar 30, 2004

#4

• Mar 30, 2004

• #4

It's not a beg deal to drop it, I was seeing if it could be done without it. I 100 percent sure that's where I'm leaking gas at. It leaks out when it's full till I burn some out of it. Thought it would be a good time to change it since I've had the gasket a while and the tank is near empty.

 

S

shallto

Founding Member

Jun 1, 2001

464

0

16

OBX, NC

Mar 30, 2004

#5

• Mar 30, 2004

• #5

I did mine with only taking the filler neck bolts and one side down,,saved some time. It was definitly easier to get back up. The only downside is that the gasket was 35 bucks from Ford.

 

roush 97

New Member

Aug 28, 2003

86

0

0

Illinois

Mar 30, 2004

#6

• Mar 30, 2004

• #6

I got mine for $27 through Ford. Guess it depends where you buy them. Maybe I'll try that. Thanks for the help guys.

 

B

Bigstang1

Founding Member

Aug 28, 2002

415

0

16

Massachusettes

Mar 30, 2004

#7

• Mar 30, 2004

• #7

I screwed around for hours trying to do it without dropping the tank and it would have been faster to just drop the tank from the beginning. CArfull putting it back in its easy to tear. just my $.02