Is this to ricey if I dont have a S/C or turbo. I just want something like Oil pressure, and fuel to air mix or something to that affect. Where can I get them at and what could I put in. I just want like two in the A pilar. Where can i get them at and how hard are they to install?
I have the dual a-pillar gauge pod from Autometer with Fuel Pressure and Boost gauges. Fairly simple to install-took about 3 hours total because I am a rookie. You can see the pic in the link in my sig.
Jump on ebay and be prepared to spend about 2/3 what you would on new stuff. I think that with the right gauges it's not too much. However, I'm a bit biased.
Autometer sells a replacement gauge bezel that puts two aftermarket gauges just below the instrument cluster. It's more expensive, but imo looks very nice. I have one in my car. I'll see if I can dig up some pics.
FYI you can get matching paint for your interior from Ford. If you go to the parts department they should be able to hook you up. If not I believe Late model mustang has some, or some name like that. Looks good!
FYI you can get matching paint for your interior from Ford. If you go to the parts department they should be able to hook you up. If not I believe Late model mustang has some, or some name like that. Looks good!
naturally aspirated:
water temp and oil pressure
then maybe oil temp, voltage,
super charged: fuel pressure and boost
then see n/a setup, unless you have the cash for a wide band O2 sensor, not the a/f stuff from autometer unless you just like pretty lights.