• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

going to dyno friday

  • Thread starter Thread starter FoxRod87
  • Start date Start date May 25, 2006

FoxRod87

Active Member
Feb 1, 2006
243
1
27
Carolina
May 25, 2006
#1
  • May 25, 2006
  • #1
what kind of power am I going to be putting down. sunday I ran a 8.28 in an 1/8 with a 1.71 60ft. the car weighs 3320 with driver. thanks.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
May 25, 2006
#2
  • May 25, 2006
  • #2
Hard to say really but you should know on friday
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
May 25, 2006
#3
  • May 25, 2006
  • #3
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
May 25, 2006
#4
  • May 25, 2006
  • #4
3xx hp and 3xx tq to the wheels. Probably low 300's for HP

Mine went a 9.00 with a 1.9 60' That was my first time at the track, and I bogged the car bad.
 
S

Speeds8erM-1

Founding Member
Sep 6, 2000
1,240
0
36
Pensacola Florida
May 26, 2006
#5
  • May 26, 2006
  • #5
FoxRod87 said:
what kind of power am I going to be putting down. sunday I ran a 8.28 in an 1/8 with a 1.71 60ft. the car weighs 3320 with driver. thanks.
Click to expand...

You gave us no real info to guess your power, need MPH not et info. Unless you want us to guess your tire pressure, launch technique or suspension mods.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
May 26, 2006
#6
  • May 26, 2006
  • #6
hummmm... 18 psi in the rear
 
9

97gtblue

New Member
Apr 11, 2005
283
0
0
pensacola,florida
May 27, 2006
#7
  • May 27, 2006
  • #7
290
 
G

grrrrrrr

New Member
May 20, 2003
289
0
0
norfolk, VA
May 27, 2006
#8
  • May 27, 2006
  • #8
I'd guess a little higher than 290, prolly mid 300's..
 
S

Speeds8erM-1

Founding Member
Sep 6, 2000
1,240
0
36
Pensacola Florida
May 28, 2006
#9
  • May 28, 2006
  • #9
It aint making mid 300's unless he ran 90-92 MPH on that pass.
 

25thmustang

Mustang Master
Sep 5, 2003
2,021
85
99
Montgomery, NY
May 28, 2006
#10
  • May 28, 2006
  • #10
Ok, Ill help you here...

I have in front of me a timeslip from when my dads car was much slower. He was making roughly 265-270 rwhp at the time... very similar wiehgt also

1.761
8.217 @ 83.49
12.891 @ 105.27

My guess is 275 rwhp for your car. Its hard to say without the mph. Also my car makes 265 rwhp and at 3200 lbs has been 1.69, and a 7.94 @ 85.8 in the 1/8th! You guys guessing 300+ rwhp, might be shooting blind here!
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
May 28, 2006
#11
  • May 28, 2006
  • #11
well it's sat night what did you put down
 
You must log in or register to reply here.

Similar threads

B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
461
Fox 5.0 Mustang Tech May 11, 2026
keel
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
978
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
C
Boosted Boss 302 HP/TQ
  • coltoncaskey12
  • May 24, 2026
  • 2010 - 2014 Specific Tech
Replies
0
Views
138
2010 - 2014 Specific Tech May 24, 2026
coltoncaskey12
C
P
rear Impact absorbers.
  • Praetorious
  • May 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
183
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2026
Praetorious
P
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
655
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?