Got my 1st 11 second timeslip!

[Tim2002GT]

Well actually, I made the 11 second run last weekend. I wanted to try and back it up with another one before I posted it up. Only managed a 12.05 today, but I'm still very happy with that!

The slip read like this...

60'--------1.730
330'-------4.943
1/8--------7.651
mph-------90.81
1000'------9.979
1/4---------11.949
mph--------111.81

Today's run was...

60'---------1.748
330'-------5.041
1/8--------7.757
mph-------90.72
1000'-----10.086
1/4--------12.055
mph-------114.05

Both passes were on the 125shot. On the 11sec pass, I had the rpm window switch set a little too low and the n2o shutoff just before the finish. The DA was around 1500 ft. on both days.

 

[CobraRed_96_GT]

wow, look ay trap at the 1/8th for both, pretty much the same, then look at the 2nd one compared to 1st at 1/4

 

[BurningRubber]

Very nice man, I bet that feels great to have accomplished!

 

[EPIK]

D@mn thats bad@$$ Tim... Congrats!!!

Thats movin!!!

 

[Tim2002GT]

On the 11sec pass, I had the rpm window switch set a little too low and the n2o shutoff just before the finish.

wow, look ay trap at the 1/8th for both, pretty much the same, then look at the 2nd one compared to 1st at 1/4

It nosed over pretty good when the n2o shutoff!

Thanks BurningRubber and EPIK! I really didn't think it had an 11 second pass in it either.

 

[ran260gt]

Nice times , I envy you

 

[bhuff30]

Very nice, it must feel good. I was so happy when I got my first 12s run, it was a bit of an accomplishment for me. Now, I'm quite close to running an 11 and with a few tweaks I think I could. I just have to get my butt out there.

 

[Tim2002GT]

Now, I'm quite close to running an 11 and with a few tweaks I think I could. I just have to get my butt out there.

That is very impressive! You have 1/2 the displacement than me and your running right along side of me! What wheel/tire setup are you running at the track?

This is what got it done for me...

They are the Summit version of Weld Prostars. 15x4 fronts and 15x8 rears with 255/60/15 MT ET Street radials.

 

[eliteJAE]

what mods besides the 125 shot man?

congrats

 

[Tim2002GT]

what mods besides the 125 shot man?

congrats

Thanks!

Power mods...JLT RAI, Prof Prod 75mm tb, TrickFlow plenum, Pypes o/r X, Bassani catback, 4.10's, and a Brenspeed nitrous tune.

Chassis/susp mods...Maximum Motorsports FLSFC's, Steeda billet aluminum weight-jacker LCA's, Ford Racing "C" springs.

I removed the jack and spare, and also the front swaybar/mounting brackets.

 

[eliteJAE]

Thanks!

Power mods...JLT RAI, Prof Prod 75mm tb, TrickFlow plenum, Pypes o/r X, Bassani catback, 4.10's, and a Brenspeed nitrous tune.

Chassis/susp mods...Maximum Motorsports FLSFC's, Steeda billet aluminum weight-jacker LCA's, Ford Racing "C" springs.

I removed the jack and spare, and also the front swaybar/mounting brackets.

damn man, your car must be running STRONG.

good to see a moderately modded gt of your year breakin into 11's

 

[Tim2002GT]

It definately likes the sauce!!! That and the fact that I drive it like someone else owns it!

 

[ShapeShifter]

badass man, congrats!

 

[bhuff30]

I'm running 06+ 17GT wheels. The fronts have dry rotted 245 BFGs and the back a 245 nitto 555R. Nothing special, but with an auto, I was able to hook it up for a 1.79 60'.

That is very impressive! You have 1/2 the displacement than me and your running right along side of me! What wheel/tire setup are you running at the track?

This is what got it done for me...
They are the Summit version of Weld Prostars. 15x4 fronts and 15x8 rears with 255/60/15 MT ET Street radials.

 

[98COBRA281]

nice, im hoping i can get into the 11's with my 125 shot, i just have to get it tuned first

 

[02nightmaregt]

Dude that makes me happy to see that. Once i quite bullshatting and get mine to the track i hope to make some good runs.

 

[Tim2002GT]

nice, im hoping i can get into the 11's with my 125 shot, i just have to get it tuned first

You should be able to run 12's on the motor! 11's shouldn't be too hard to reach with the n2o, just got to make it stick off the line! A good 60' goes a long way.

 

[BlownStangGT]

Congrats man!!!! I am hoping to have my first ever 11 second past in the next month or so....right from the 13 second zone to the 11's.....but Im hoping to do it in street trim....275's up front, handling suspension. It was always a dream of mine to have a car that can cut corners and still run 11's at the track