Got the snake dyno tested GRAPH....VID

hotmustang331 · Jan 18, 2008

Im actually very happy with it. I was informed by the original owner that his #s were 441/451, so that got me depressed. The guy that bought the car from him, and who sold it to me...said it made 451/452. He was all over the place on the boards with its #s, so I think he just made a mistake.

All I did was port the plenum myself and install the evenflow cooling mod. And she layed down this.

Overlay of the first (best) run and the second.

And here is the video.

http://www.youtube.com/watch?v=rgT-jxkDfTs

A buddy of mine strapped his full exhaust W/ air filter, 05 M6 6.0 GTO down to the dyno as well. I should have a vid of that up tomorrow....just need him to say the word and ill upload it to youtube.

Discuss

CobraRed_96_GT · Jan 18, 2008

Nice, man! Those are no numbers to shake a stick at for sure, time for a sig change. Must be nice knowing your putting that down with forged parts now huh?

SaleenGT2001 · Jan 18, 2008

nice numbers.
its not the TT GT but its ok

SilverBullet00 · Jan 18, 2008

I wish you would quit posting this stuff.... you are making me want to sell my car for a cobra....

But nice numbers!

bakos24 · Jan 18, 2008

SilverBullet00 said:
I wish you would quit posting this stuff.... you are making me want to sell my car for a cobra....

But nice numbers!

Yeah, tell me about it. I hate you guys and your kewbras.

spederman · Jan 18, 2008

dammit, internet nazi's at work block youtube, somebody just tell me the numbers please...

georgio440 · Jan 18, 2008

Awesome vid, great numbers!

I want a Termi so bad.

CobraRed_96_GT · Jan 18, 2008

spederman said:
dammit, internet nazi's at work block youtube, somebody just tell me the numbers please...

458/472. you cant see the dyno graph pics?

hotmustang331 · Jan 18, 2008

Heh thanks all

Oh and yes its nice knowing I have alot of room left

And im actually VERY impressed with this car....I put ALOT into my GT to make it do 450RWHP. This one has just a few things done to it and its there....heck and the lower "pulley" it has is equal to just a 3.1 upper pulley. Stock upper is 3.65 and most throw on a 2.76 or 2.8...nets around 15PSI. Im seeing 13.5PSI or so with mine.

LaserSVT · Jan 18, 2008

I hate you and all your stinking power

JK I am still jealous though, cant wait till dad gets his Termi so I cam feel that thrust again

03ghoststang · Jan 18, 2008

nice numbers

02LaserRed2V · Jan 18, 2008

Not bad. You need a twin screw. If you ever catch me, perhaps it'll motivate me to mod some more.

SaleenGT2001 · Jan 18, 2008

02LaserRed2V said:
Not bad. You need a twin screw. If you ever catch me, perhaps it'll motivate me to mod some more.

i'm coming for you.......just wait

hotmustang331 · Jan 18, 2008

Yea Gary, im passing the torch on to saleenGT2001 GET EM MANG!

Im happy with the car...it makes good power and drives GREAT. Perfect daily driver.

Maybe one of these days ill build another all out power monster Im not sure if I want to do a talon or if I want to go straight into my big plans for my 71 ranchero.

Laser, you will LOVE your dads termi....infact im pretty sure you wont ever let him drive it I think what you will like most is the part throttle power...feels literly like it has a big inch motor in it. Gets the same gas milage when its used too HAHAHA! Im adveraging around 18...definatly went down vs the GT All highway is DARN close though.

And thanks 03ghost

ADRENLN · Jan 19, 2008

hey man, glad you like the new car! the numbers look real good. i bet your loving that low end torque. car looks good.

like you said, sometimes its just nice to have a car with a little less hp and be a bit more reliable. if you push any car to the limits there is most likely going to be problems to deal with. however, i think you can push that one some more with out any issues. i guess you already built a monster once though.

i could push more power with a smaller pulley on the novi 2000 then i plan too. i just dont want to increase flying belts and things blowing up. i figured id do a conservative amount of boost. whatever power i end up with is what i end up with.

02LaserRed2V · Jan 19, 2008

SaleenGT2001 said:
i'm coming for you.......just wait

BRING IT! You'll have plenty of time as well since I'll be in the market for a new toy this spring. And that one won't be a slouch either.

SaleenGT2001 · Jan 19, 2008

ADRENLN said:
hey man, glad you like the new car! the numbers look real good. i bet your loving that low end torque. car looks good.

like you said, sometimes its just nice to have a car with a little less hp and be a bit more reliable. if you push any car to the limits there is most likely going to be problems to deal with. however, i think you can push that one some more with out any issues. i guess you already built a monster once though.

i could push more power with a smaller pulley on the novi 2000 then i plan too. i just dont want to increase flying belts and things blowing up. i figured id do a conservative amount of boost. whatever power i end up with is what i end up with.

get a 10% OD crank pulley and a 2.8 blower pulley. with your 8 rib you shouldnt have any problems.

the reason mine threw so many belts was b/c it was gripping so harrd at the blower/alt is was letting the belt slack up from the alt to the PS pump and it was jumping the PS pulley and then shreading.

SaleenGT2001 · Jan 19, 2008

02LaserRed2V said:
BRING IT! You'll have plenty of time as well since I'll be in the market for a new toy this spring. And that one won't be a slouch either.

maybe we can set up a race during mustang week. (that is if my car ever gets running again) you're close enough to make it to SC arent you??

02LaserRed2V · Jan 19, 2008

SaleenGT2001 said:
maybe we can set up a race during mustang week. (that is if my car ever gets running again) you're close enough to make it to SC arent you??

I'll be at MW this year. We go from 60-140mph roll.

04GTMustang · Jan 19, 2008

can i get up in this. im building this summer for a big shot of the nitrous with cams, heads and all lol. cant let u guys have all the fun.

but my car will suck from a roll cause that juice is really only going to be good for the torque. Im looking for about 550rwhp on juice lol. but its going to be some rediculous torque number like probably 700 or so lol.

Got the snake dyno tested *GRAPH....VID*

Active Member

Attachments

Active Member

Well-Known Member

New Member

I find there is nothing better than a tasty wiener

Member

Member

Active Member

Active Member

Got FB banned again for saying nards

Well-Known Member

New Member

Well-Known Member

Active Member

Active Member

New Member

Well-Known Member

Well-Known Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency

Got the snake dyno tested GRAPH....VID