• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

gt-40 heads $$$$

  • Thread starter Thread starter BDASPNY
  • Start date Start date Jan 31, 2006

BDASPNY

Member
Jan 3, 2006
103
0
19
HAMPTON ROADS
Jan 31, 2006
#1
  • Jan 31, 2006
  • #1
i can get a pair of cast iron gt-40 heads for 450 they came off a running engine and are in great shape. is 450 a good price? and i checked they are real gt-40 not the gt-40p ones.
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Jan 31, 2006
#2
  • Jan 31, 2006
  • #2
BDASPNY said:
i can get a pair of cast iron gt-40 heads for 450 they came off a running engine and are in great shape. is 450 a good price? and i checked they are real gt-40 not the gt-40p ones.
Click to expand...


thats about the going price on them 400-600 depending whats done to them if they are stock try to talk them down to 370, that way upgraded springs are 130 and you would have an even 500 in them with upgraded springs
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jan 31, 2006
#3
  • Jan 31, 2006
  • #3
I found a set for $500 a while ago and they are still there so maby $500 is a little high but $450 seems resonable. I'd trt to get them a bit cheaper like mentioned above.
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Jan 31, 2006
#4
  • Jan 31, 2006
  • #4
i paid $280 for the heads and $70 for shipping. $450 seems a little high for stock heads. the cost will go higher then $450 after machine work.
 

BDASPNY

Member
Jan 3, 2006
103
0
19
HAMPTON ROADS
Jan 31, 2006
#5
  • Jan 31, 2006
  • #5
i wasn't sure if that was high or not. they look really good come with 1.72 rr installed and they would be a fresh valve job on them
 

JBeezy53

Member
Dec 28, 2003
559
1
19
Sacramento, Ca
Jan 31, 2006
#6
  • Jan 31, 2006
  • #6
A guy in my area was selling an unused pair off a crate motor he bought. He put them on Ebay for $400 3 times and no one bid. I told him they wouldn't sell. I think $300 is a good price.
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
Jan 31, 2006
#7
  • Jan 31, 2006
  • #7
BDASPNY said:
i wasn't sure if that was high or not. they look really good come with 1.72 rr installed and they would be a fresh valve job on them
Click to expand...


that would be woth $450
 
I

IntenseBlue

Member
Jul 10, 2005
946
0
16
Jan 31, 2006
#8
  • Jan 31, 2006
  • #8
legalize420 said:
that would be woth $450
Click to expand...

Yup, but only with the rockers.
 
B

bimmertech

New Member
May 3, 2005
1,123
0
0
merriam, ks
Jan 31, 2006
#9
  • Jan 31, 2006
  • #9
if you are close to kansas city you can come pick mine up for $200.
 

BDASPNY

Member
Jan 3, 2006
103
0
19
HAMPTON ROADS
Feb 1, 2006
#10
  • Feb 1, 2006
  • #10
bimmertech said:
if you are close to kansas city you can come pick mine up for $200.
Click to expand...


THAT WOULD BE GREAT. BUT THAT IS A LITTLE FAR FROM VA.
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Feb 1, 2006
#11
  • Feb 1, 2006
  • #11
i bought a set off ebay for $420 shipped, and they are for sale in stangnet.coms classifieds for that same price. I went with GT-40 "P"'s instead and just have these sitting around!
jack
 
T

TorontoJohn

New Member
Sep 8, 2004
51
1
0
Feb 1, 2006
#12
  • Feb 1, 2006
  • #12
If you want them buy them! If they are local, just walk in with the cash(whatever you want to spend) and say this is what i have, take it or leave it.

I got my new bike that way. Dealer wanted 9, I got it for 8. It is easy to bargain when they see the cash.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,120
224
Massachusetts
Feb 1, 2006
#13
  • Feb 1, 2006
  • #13
For $450 you can get them new

http://www.tristatecylinderhead.com...id=40&osCsid=5de6834f43eacb185e8f6441ff6a434f
 
You must log in or register to reply here.

Similar threads

Engine Felpro 9333 pt1 (with 8psi boost)
  • JD1964
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
1K
Fox 5.0 Mustang Tech Feb 1, 2026
Qtrhrse23
N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
278
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
S
thread no longer needed
  • skidad
  • Oct 17, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
148
1996 - 2004 SN95 Mustang -General/Talk- Oct 17, 2026
skidad
S
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Electrical Parasitic Draw, Fuse 8
  • N8827N
  • Sep 15, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
289
Fox 5.0 Mustang Tech Sep 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?