• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

GT, No Oil Pressure Until Warm

  • Thread starter Thread starter StangVert00
  • Start date Start date Apr 19, 2005

StangVert00

New Member
Mar 2, 2003
234
0
0
Stoneham, MA
Apr 19, 2005
#1
  • Apr 19, 2005
  • #1
I drive a '00 GT 'Vert. (Auto)
I have noticed recently that I have no oil pressure when I start the car when it's cold. (Engine cold, not air temp)
After about 2 minutes, the oil pressure gauge goes to mid, then drops to zero, then mid, then zero,etc...
This happens until the engine reaches normal temp. As long as the engine stays warm, the oil pressure gauge seems to be working properly.
I have changed the oil, and it still does the same thing.
I would assume that it would be reading SOME oil pressure when you first start the engine.
Bad gauge?
I was thinking the voltage regulator, but it would affect all the gauges on the panel, not just the oil pressure gauge.
Any ideas?
Thanks,
StangVert00
 

blackstalion666

New Member
Mar 31, 2005
177
0
0
New Jersey
Apr 19, 2005
#2
  • Apr 19, 2005
  • #2
well as long as your not hearing any knocking or taping from the engine i say its a safe bet you got pressure. sounds to me that you have a bad oil pressure sending unit.
 

Dan_Soprano

15 Year Member
May 7, 2003
7,410
54
129
Jacksonville, FL
Apr 19, 2005
#3
  • Apr 19, 2005
  • #3
change the oil pressure sending unit.
 

StangVert00

New Member
Mar 2, 2003
234
0
0
Stoneham, MA
Apr 19, 2005
#4
  • Apr 19, 2005
  • #4
Bad sending unit? Sounds like that is it! How difficult would it be to replace? Could I buy one myself and replace it? I don't hae to drop the oil pan or anything do I?

Thanks,
StangVert00
 

blackstalion666

New Member
Mar 31, 2005
177
0
0
New Jersey
Apr 19, 2005
#5
  • Apr 19, 2005
  • #5
yea if you have basic mech skills you should have no problem. it should be located on the oil filter housing
 
F

ForPointSex

Founding Member
Mar 19, 2002
395
0
16
Mercer, NJ
Apr 19, 2005
#6
  • Apr 19, 2005
  • #6
Item 24 is the sender.
 

Hungry4Horses

New Member
Aug 26, 2004
42
0
0
Fremont, CA
Apr 19, 2005
#7
  • Apr 19, 2005
  • #7
Dan_Soprano said:
change the oil pressure sending unit.
Click to expand...
Had the same problem on my 01 GT. Modular depot has a sticky about the issue.
http://forums.modulardepot.com/showthread.php?threadid=51198
 
You must log in or register to reply here.

Similar threads

Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
84
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
P
Weird Voltage & Oil Pressure Gauges
  • PNN
  • May 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
51
SN95 V6 Mustang Tech May 22, 2026
PNN
P
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
253
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
D
Fuel Erratic Fuel Pressure 1985 GT
  • DienstXIV
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
656
Fox 5.0 Mustang Tech Jan 16, 2026
AeroCoupe
M
warmed up, hard re-starting on hot days
  • michaelleewebb
  • Mar 26, 2026
  • SN95 V6 Mustang Tech
Replies
9
Views
271
SN95 V6 Mustang Tech Mar 29, 2026
michaelleewebb
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?