H&R supersports

frdstang00 · Mar 21, 2011

Received my springs from american muscle, I have a 2004 Gt convertible. Curious to see who is running them without the insulators and with. I know the drawbacks to both but I don't want to do the job twice, any suggestions and pics would help. Thanks

I know this topic has been beat to hell, but a search didn't give me much to go with

joshjwc9 · Mar 21, 2011

With isolators, but I do have x2 balljoints without spring spacers. So fronts are about a 1/4 inch lower than yours would be. Rears are Super Sports too, except for minor adjusting with my MM XD Adjustable Control Arms.

frdstang00 · Mar 21, 2011

WOW, your car looks good, Thanks for the pic. Similar to mine in color.

Deleted member 38176 · Mar 22, 2011

Be sure to wrap a layer or two of duct tape or electrical tape around the contact area of the spring to help cushion them.

007 · Mar 22, 2011

Hope the roads near you are good. The H&R Vert springs are rated for more drop than the Coupe springs. They come in very low even with isolators (as you can see). It was completely impractical up here in Mass. Constantly grounding out was no fun...

frdstang00 · Mar 22, 2011

Nightfire that yellow is looking real good, that was my other color choice> i teke it you are not running the isolators then,

007, i do live in Mass, in the brockton area, but Thankfully my company provides me with a work van, so this thing will see very limited usage on weekends and only during summer months. Do you go to any cruise nights or shows in the area. It's been years since i had a stang so I fell off of the car scene.

007 · Mar 22, 2011

frdstang00 said:
007, i do live in Mass, in the brockton area, but Thankfully my company provides me with a work van, so this thing will see very limited usage on weekends and only during summer months. Do you go to any cruise nights or shows in the area. It's been years since i had a stang so I fell off of the car scene.

Theres a good show near me in Sturbridge each year. Sometimes I hit up MustangsUnlimited in CT. Otherwise I have a crowd of my car buddies over every now and then for a big detailing session at my place and some food/beer.

Beware tho mate... I REALLY dont recommend the H&Rs for MA roads. They SLAM verts. I had to remove my front springs and go with Roush instead because it was totally ridiculous! (my car is rarely driven also) Now I'm adding thicker isolators for more clearance. I'd go with Ford springs if I could do it again.

Doing CC plates and shocks as well right?

Deleted member 38176 · Mar 22, 2011

frdstang00 said:
Nightfire that yellow is looking real good, that was my other color choice> i teke it you are not running the isolators then

Nope, no iso's

frdstang00 · Mar 22, 2011

I used to go all the time to mustangs unlimited shows when I had my 2000, no one could understand why I would drive An hour and half each way to go. For me it was a good time, and nice to see the cars.

So these springs really slam the car huh... I had sportlines on a coupe with the saleen body kit, and didn't have issues, but I know the verts are heavier.

As for cc plates, struts and shocks. I am waiting for those before I install the springs. I'd rather do it once.

007 · Mar 23, 2011

frdstang00 said:
So these springs really slam the car huh...

I remember right on the H&R website their vert springs were rated for more drop than the coupe springs. Dont know why. 2.6" on the front I think. Fine if you live where the roads are nicely maintained, but up here with frost heaves and snow plow damage everywhere its not good at all.
I could barely get two fingers between the tire and wheel well and got fed up grouding out the K member or nose. I ended up being so paranoid about grounding out that I couldnt even enjoy driving it.

frdstang00 · Apr 14, 2011

Got the itch and installed the springs on Monday

ToplessStang · Apr 15, 2011

I installed urethane isolators. No regrets.

Night Shifter · Apr 16, 2011

frdstang00 said:
Got the itch and installed the springs on Monday

looks damn good

now all you need is a chin spoiler

frdstang00 · Apr 16, 2011

Night Shifter said:
looks damn good

now all you need is a chin spoiler

Thanks, i've been thinking about my next purchase and it's either that or the mach 1 grill delete.

007 · Apr 16, 2011

frdstang00 said:
Thanks, i've been thinking about my next purchase and it's either that or the mach 1 grill delete.

I have a used chin spoiler I can let go cheapo. Its not perfect tho. Has a few marks on it.

H&R supersports

frdstang00

joshjwc9

Active Member

frdstang00

Deleted member 38176

007

frdstang00

007

Deleted member 38176

frdstang00

007

frdstang00

Attachments

ToplessStang

Member

Night Shifter

Well-Known Member

frdstang00

007

Similar threads

H&R supersports

Active Member

Deleted member 38176

Deleted member 38176

Attachments

Member

Well-Known Member

Similar threads

Privacy & Transparency

Privacy & Transparency