'95 Cobra
I'm hoping that someone knows where the splice is located in the harness that is after Fuse #18 and before the Ig Control Module B+ terminal. According to the schematic, that power feed splits into three separate wires at some point prior to a 23-pin connector. We've got power at only one of those three ending points, but jumping power to the CCRM at pin 13 gets us going. Not being familiar with this model, it'd be great if someone here knew where the splice occurs or if the splice is even there as shown on the schematic. Thanks in advance for any input.
Van
slacker Mitsu tech
I'm hoping that someone knows where the splice is located in the harness that is after Fuse #18 and before the Ig Control Module B+ terminal. According to the schematic, that power feed splits into three separate wires at some point prior to a 23-pin connector. We've got power at only one of those three ending points, but jumping power to the CCRM at pin 13 gets us going. Not being familiar with this model, it'd be great if someone here knew where the splice occurs or if the splice is even there as shown on the schematic. Thanks in advance for any input.
Van
slacker Mitsu tech