hate my new BBK o/r x

DCx 98GT · Aug 15, 2006

i took off my catted magnaflow x today because i hit something that dented and totally trashed the ceramics inside my driver side cat. so driving around with a blown out cat and ceramic flying out of your tail pipes sucks!

i dont live to far from brothers performance so i drove down there and bought an o/r BBK X for my 01 cobra. the pipe fit well but i hear an exhaust tick sound at around 2200rpm, then it smooths out. i went to ford and got a new flange gasket for the passenger side but i still think its leaking. Im running a magnaflow cat back as well. i have always hated my magnaflows but i got so used to the sound with the catted X. i think im just going to break down and buy another magnaflow X or have the bad cat cut out and a new one welded in.

the factory bolts are a total bitch! now i know why you guys switch to long tubes. maybe i should just have a shop install the factory piece and be done with it. im tired of messing with my exhaust.

DCx 98GT · Aug 15, 2006

and some other things i forgot. i looked at my stock mid pipe and the magnaflow and they both have a welded flange that sticks up out of the pipe to help seal to the passenger manifold. the bbk pipe didnt have that feature at all! what brand does?

merc123 · Aug 15, 2006

I'd get MAC. I have a o/r H-pipe and it was pretty good. I don't know about their catted systems though. Some people say they are hit or miss with quality but I didn't have any problems with mine.

squares98 · Aug 15, 2006

If you want Bassani, You can get the catted midpipe at fairway ford in Placentia for $320., Exhaust is 350. Only about a 50minute drive from San Ber.

AmBo · Aug 15, 2006

squares98 said:
If you want Bassani, You can get the catted midpipe at fairway ford in Placentia for $320., Exhaust is 350. Only about a 50minute drive from San Ber.

Isn't that rediculously cheap for Bassani?

stangGT97 · Aug 15, 2006

AmBo said:
Isn't that rediculously cheap for Bassani?

I was about to ask that myself. The stainless catback for 96-97 GTs is $650 and the X is $400+

dlascoskie · Aug 15, 2006

I love my BBK H pipe and shorty headers...............get compliments all the time on the sound. And sometimes I can't get out of my car till Joey calms down.

Mach1Run · Aug 15, 2006

AmBo said:
Isn't that rediculously cheap for Bassani?

Probably the BX aluminized stuff.

stangGT97 · Aug 15, 2006

Greensix said:
Probably the BX aluminized stuff.

yeah but even the Bx catback is $450-$500ish, Bx catted X is $400

DCx 98GT · Aug 15, 2006

well im being a cheap ass. im going to have a local shop install the factory H back in. i called another exhaust shop in town that stocks flowmasters and they said it would be about $330 to cut out my magnaflows and weld in some 2 chambers. $330! WTF! i could buy the whole catback for that! i was thinking $150 to $200. oh well. i might as well switch to the factory cat back too. i hate the sound of my magnaflows with the factory H.

squares98 · Aug 15, 2006

Yep it is bx, and rediculously cheap.
Bassani is 5 miles away from Fairway Ford and they were an original distributor, which is probably why they get their kits so cheap.

03ghoststang · Aug 15, 2006

squares98 said:
Yep it is bx, and rediculously cheap.
Bassani is 5 miles away from Fairway Ford and they were an original distributor, which is probably why they get their kits so cheap.

isnt that located in Anaheim ??? its like 30mins from where i live

007 · Aug 15, 2006

Just buy a new cat from Magnaflow and weld it in.

stangGT97 · Aug 15, 2006

DCx 98GT said:
well im being a cheap ass. im going to have a local shop install the factory H back in. i called another exhaust shop in town that stocks flowmasters and they said it would be about $330 to cut out my magnaflows and weld in some 2 chambers. $330! WTF! i could buy the whole catback for that! i was thinking $150 to $200. oh well. i might as well switch to the factory cat back too. i hate the sound of my magnaflows with the factory H.

Flowmaster american thunder catback is $320 at Summit... I would think the factory catback would cost you an arm and a leg, just get the flows and it will give you a nice mellow tone with your factory H pipe

lover · Aug 16, 2006

Go with an UPR O/R X with a Flowmaster Catback....

shallowreef · Aug 16, 2006

I vote SLP everything bolts together so if you wanted you could swap out the cats and go off road. Its very simple to do. I don't know what they run but i have a full SLP exhaust and except for a small exhaust leak that i can't seem to (actually i'm to lazy) fix it sounds great.

Check out www.LMPerformance.com they are pretty good on their prices.

rellic50 · Aug 16, 2006

Call FMS on second street , I know they stock Magnaflow stuff . Also you can try this mom and pop shop on 5th street thats also haves Magnaflow cats in stock for cheap .

DCx 98GT · Aug 16, 2006

i ended up just putting the stock H back on. im going to try and sell all my exhaust parts or trade in the hopes of making enough cash to get some flows. the magnaflows with the stock H arnt that bad. im done with mid pipes! so i have a magna flow stainless X with a bum cat, BBK o/r X, stock cat back (01 cobra), BBK MILs, and well my magnaflow catback (01 cobra) so if anyone in the so cal area with a cobra wants to trade or buy lemme know.

dcxshoexco@aol.com

hate my new BBK o/r x

DCx 98GT

DCx 98GT

merc123

Active Member

squares98

Member

AmBo

Active Member

stangGT97

New Member

dlascoskie

New Member

Mach1Run

New Member

stangGT97

New Member

DCx 98GT

squares98

Member

03ghoststang

Well-Known Member

007

stangGT97

New Member

lover

shallowreef

New Member

rellic50

New Member

DCx 98GT

Similar threads

hate my new BBK o/r x

Active Member

Member

Active Member

New Member

New Member

New Member

New Member

Member

Well-Known Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency