• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Head Gasket blown??

  • Thread starter Thread starter leon_reynolds
  • Start date Start date Jun 2, 2006
L

leon_reynolds

Founding Member
Apr 24, 2002
91
0
6
Jun 2, 2006
#1
  • Jun 2, 2006
  • #1
I just finished putting on a set of world heads and an edelbrock performer upper and lower. Ran the car for a day and it started to get hot....let it cool and checked fluid and it was ok but started without cap on and it is bubbling a little and overflowing. There is also white smoke coming out the exaust so I did a pressure test on the cooling system to see if it would leak down but it held like a champ. I am fairly certain I blew the heads, but is there anything else I should check to make sure that is the problem......no milkshake under filler cap yet or fluid in oil......what next? thanks
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jun 2, 2006
#2
  • Jun 2, 2006
  • #2
If the cooling system held pressure, then you are probably ok.

How long did you let the system sit at pressure?

Maybe the HG only leaks when hot though?

jason
 
L

leon_reynolds

Founding Member
Apr 24, 2002
91
0
6
Jun 2, 2006
#3
  • Jun 2, 2006
  • #3
I let it sit for 10 minutes with no drop in pressure. If it holds pressure and the head gaskets are ok, where else could I be getting antifreeze in my engine.....there is still white smoke......and it is overheating when running. Thanks
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 2, 2006
#4
  • Jun 2, 2006
  • #4
it seems wierd to me that a cooling system would hold pressure if a Head Gasket was blown. How much white smoke are we talking about? as for over heating was the system burped properly? Are you getting a flow through your top rad hose? was the water pump changed? (if so was it a reverse flow) thermo stat sticking? are you checking the temp with the factory gauge or do you have a aftermarket piece in?
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jun 2, 2006
#5
  • Jun 2, 2006
  • #5
Try checking the TB/EGR gasket first, and then check the Lower manifold to engine block gaskets. Also check and make sure you put the thermostat in correctly.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jun 2, 2006
#6
  • Jun 2, 2006
  • #6
88Stang331 said:
Try checking the TB/EGR gasket first, and then check the Lower manifold to engine block gaskets.
Click to expand...
thats a good one i forgot about that.
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
543
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
606
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
411
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Fox Help
  • 93fox85
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
330
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 23, 2026
Noobz347
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
516
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?