header won't go in!

I installed MAC headers and o/r h-pipe over the weekend. However, I am having a problem getting the driver side header in. It won't clear the steering linkage that is on that side, can't even get it in far enough to line up the holes. It has been suggested to me that I replace the motor mounts, that the engine may be sitting too low. Car has 150K miles on it and I have no idea if the mounts have ever been changed. Does this sound right? any other suggestions?
 
some people end up un-bolting the motormounts and jacking the engine up sideways to get the driver side header in.

your mounts.. may or may not be bad... but in either case jacking the engine up should give u clearance for the install.