• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

headlight and brigtning

  • Thread starter Thread starter snake109
  • Start date Start date Nov 9, 2006

snake109

New Member
Dec 2, 2004
60
1
0
Austin TX
Nov 9, 2006
#1
  • Nov 9, 2006
  • #1
what products would you recomend to brighten the headlights and paint, i was planning on using rubing compound for the paint but if you know somthing better and not too pricy let me know. as for the headlights all the stuff i tried only worked for a few months then they get yellow again.
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Nov 9, 2006
#2
  • Nov 9, 2006
  • #2
Anything you do with the headlights isn't going to be a permanent solution. Before I replaced my lights, I wet sanded the lenses with 800 then 1000 grit, then went over that with 3M rubbing compund, and finished up with a good coat of wax. That lasted the longest of any method I've tried.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Nov 9, 2006
#3
  • Nov 9, 2006
  • #3
just replace the lamps and be done with it.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Nov 10, 2006
#4
  • Nov 10, 2006
  • #4
stykthyn said:
just replace the lamps and be done with it.
Click to expand...

I made mine last 10 years by sanding/polishing, but what people don't seem to realize is that the inside gets worn too. The reflector inside is an important part of how bright your lights are. If I had known how much better I could see with new ones, I would have replaced them sooner. IMO, OEM is the best for the headlight.
 

snake109

New Member
Dec 2, 2004
60
1
0
Austin TX
Nov 10, 2006
#5
  • Nov 10, 2006
  • #5
ok. what about the paint, the sides of the car dont look so bad the the engine hood and roof are prety dull and have plenty of swirles.
 

Anlushac11

Founding Member
Feb 17, 2001
2,270
0
0
Indianapolis, Indiana
Nov 11, 2006
#6
  • Nov 11, 2006
  • #6
My 91 lenses are almost opaque.

I found I can get a set of clear Cobra style headlights at NAPA. I was told $75.00 for the pair but I havent been over there yet to check on them. I already bought clear corners and clear marker lights from a local speed shop.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Nov 11, 2006
#7
  • Nov 11, 2006
  • #7
Wow,, I checked www.napaonline.com and it shows $145 apiece for the headlamps. Here is the link http://www.napaonline.com/masterpages/NOLMaster.aspx?PageId=430&CatId=9&SubCatId=11

I wish they were $75 a set.
 

mgwshel

New Member
Jan 16, 2006
4
0
2
Washington state
Nov 21, 2006
#8
  • Nov 21, 2006
  • #8
If you wanna go cheap, this place has them for $105 shipped. Probably not the quality of OEM, but better than your old yellow ones.

http://www.foxmustangrestoration.com/?p=vp&id=92
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Nov 21, 2006
#9
  • Nov 21, 2006
  • #9
I think 50resto is even cheaper than that.
 

mgwshel

New Member
Jan 16, 2006
4
0
2
Washington state
Nov 21, 2006
#10
  • Nov 21, 2006
  • #10
For the whole 6 piece set? That $105 is for the *set.*
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Nov 21, 2006
#11
  • Nov 21, 2006
  • #11
Don't take my word for it. See for yourself.http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-13007E-KIT%201&comp=LRS
 

mgwshel

New Member
Jan 16, 2006
4
0
2
Washington state
Nov 22, 2006
#12
  • Nov 22, 2006
  • #12


6 piece set shipped for $99. Even better--thanks for the tip.
 

Henceforward

The Avatar Master
Founding Member
Jul 17, 2001
485
0
0
Nov 22, 2006
#13
  • Nov 22, 2006
  • #13
mgwshel said:
For the whole 6 piece set? That $105 is for the *set.*
Click to expand...

You can waste your time getting them 80% clear with polishing compound, and various grits of sandpaper, or you can drop a little over a hundred dollars and have OEM Ford headlamps that can be properly aimed and won't fog up.

Cjponyparts.com

HEADLIGHT KIT 1987-1993

Part #: HLK1
Price: 119.95



If you want to tackle the headlight restoration, use this guide...

Here is a perfect DIY how to

http://www.nseconsulting.com/bmw/hpt.pdf
 
You must log in or register to reply here.

Similar threads

G
In expensive ceramic coating
  • gray owl
  • Jul 12, 2026
  • Mustang Sound & Shine All
Replies
6
Views
171
Mustang Sound & Shine All Jul 22, 2026
gray owl
G
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
276
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
284
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
639
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?