• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Headlight and Rear lights TINT.. YEH OR NEY ?

  • Thread starter Thread starter whyask
  • Start date Start date Jun 6, 2007
  • 1
  • 2
Next
1 of 2 Next Last

whyask

New Member
Apr 4, 2005
735
1
0
Sacramento
Jun 6, 2007
#1
  • Jun 6, 2007
  • #1
Ok, thinking about it, not sure 'bout the pro's and cons' chime in guys I need your help and input!
 

streethorse

15 Year Member
Oct 8, 2005
1,042
6
58
Dallas Texas
Jun 6, 2007
#2
  • Jun 6, 2007
  • #2
They look good as is, unless you just dont like red.
I wouldnt do it cause I want mine to be as bright as posible to keep some
moron from slaming into me. Tint has to reduce brightness, thats what its
supposed to do.
 

Ordie

Member
Nov 23, 2004
0
0
7
Key West, FL
Jun 6, 2007
#3
  • Jun 6, 2007
  • #3
I wouldn't do the headlights.

heres the taillights


 

y2k2GT

New Member
Mar 1, 2007
13
0
1
Moyock, NC
Jun 6, 2007
#4
  • Jun 6, 2007
  • #4


 
K

Kilgore Trout

Fried or Broiled ?
10 Year Member
Mar 30, 2005
4,749
95
134
Jun 6, 2007
#5
  • Jun 6, 2007
  • #5
I think they both look good tinted especially certain colors like metallic red and black with smoked head/tail lights. However if the tint is too dark it does not look as good and the cops will pull you over sometimes for it.
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Jun 6, 2007
#6
  • Jun 6, 2007
  • #6
i say tint them, but not too dark.
i've had the copletely pitch black at like 2%....and then now with like 15% and i have to keep my eyes out for cops and always worry about riding without the tail lights on because they look close to pitch black when the sun isnt shining.

they do look very good on cars that have other black parts on them ex: black rims or dark black tint. depends on the color i guess.
 
D

Dragstr05

New Member
Dec 21, 2004
643
1
0
Stafford VA
Jun 6, 2007
#7
  • Jun 6, 2007
  • #7
IMO it depends on the color. I like tinted tails, but I cant stand tinted headlights unless its on a black car with a full black theme.
 

snowboarder1988

New Member
Jul 10, 2006
27
0
0
California
Jun 6, 2007
#8
  • Jun 6, 2007
  • #8
Just did mine last weekend...I have a black car of course...but I like it.

 

lvmustanggt

New Member
Apr 9, 2006
721
0
0
Las Vegas
Jun 6, 2007
#9
  • Jun 6, 2007
  • #9
snowboarder1988 said:
Just did mine last weekend...I have a black car of course...but I like it.

Click to expand...

any write up's on how to tint ? I have never done any
 

snowboarder1988

New Member
Jul 10, 2006
27
0
0
California
Jun 6, 2007
#10
  • Jun 6, 2007
  • #10
lvmustanggt said:
any write up's on how to tint ? I have never done any
Click to expand...

Yeah, I've done a couple appearance updates to my car in the past couple weeks. I'll be taking some pictures this weekend...once I actually wash the car. As far as the tint goes...It's just VHT niteshades. The trick is that you must follow it up with 2-3 clear coats. Hopefully I'll post a thread this weekend with pictures of the new mods.
 

lvmustanggt

New Member
Apr 9, 2006
721
0
0
Las Vegas
Jun 7, 2007
#11
  • Jun 7, 2007
  • #11
snowboarder1988 said:
Yeah, I've done a couple appearance updates to my car in the past couple weeks. I'll be taking some pictures this weekend...once I actually wash the car. As far as the tint goes...It's just VHT niteshades. The trick is that you must follow it up with 2-3 clear coats. Hopefully I'll post a thread this weekend with pictures of the new mods.
Click to expand...

That will be sweet , thanks
 

lvmustanggt

New Member
Apr 9, 2006
721
0
0
Las Vegas
Jun 7, 2007
#12
  • Jun 7, 2007
  • #12
VHT niteshades

Just bought it off ebay for $ 17.64. Thanks for the name that I could find the product
 
1

19mustang95

New Member
May 28, 2005
27
0
0
home:key west,FL School:Orlando, FL
Jun 7, 2007
#13
  • Jun 7, 2007
  • #13
i love mine..... but i wouldn't use VHT, i had a bad experience with it.
 

supastang03

Member
Mar 17, 2004
214
0
16
Miami/Gainesville UF
Jun 7, 2007
#14
  • Jun 7, 2007
  • #14
Nheeeeeeeeeeeeey
 

Blackie Lawless

You're just jealous because the voices only talk t
Founding Member
May 18, 2001
0
0
16
Naples, FL
Jun 7, 2007
#15
  • Jun 7, 2007
  • #15
TrueBlue03 said:
i say tint them, but not too dark.
i've had the copletely pitch black at like 2%....and then now with like 15% and i have to keep my eyes out for cops and always worry about riding without the tail lights on because they look close to pitch black when the sun isnt shining.

they do look very good on cars that have other black parts on them ex: black rims or dark black tint. depends on the color i guess.
Click to expand...

That looks killer. Hopefully mines look as good on my True Blue. I messed up the DIY tint job though and in frustration just ordered the vinyl smoked overlays from StangMods. I get them in tomorrow. We'll see how it goes.
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Jun 7, 2007
#16
  • Jun 7, 2007
  • #16
Blackie Lawless said:
That looks killer. Hopefully mines look as good on my True Blue. I messed up the DIY tint job though and in frustration just ordered the vinyl smoked overlays from StangMods. I get them in tomorrow. We'll see how it goes.
Click to expand...

lol that was actually my 3rd attempt at the VHT niteshades method because its so permanent and i kept messing up and having to hand sand it all back down.
total time speant making the taillights look like that: 10+ hours.... NOT WORTH IT. i should have listened to everyone and bought the overlays...

i really recommend everyone to go with the vinyl overlay method. They look better, are easier to apply and end up saving you so much time (and frustration )
 

Ordie

Member
Nov 23, 2004
0
0
7
Key West, FL
Jun 7, 2007
#17
  • Jun 7, 2007
  • #17
Mine are the overlays

http://www.ninosport.com/Tinted-Brake-Lamp-Overlays-1999-04-Mustang-Cobra?sc=2&category=1264
 

snowboarder1988

New Member
Jul 10, 2006
27
0
0
California
Jun 7, 2007
#18
  • Jun 7, 2007
  • #18
TrueBlue03 said:
lol that was actually my 3rd attempt at the VHT niteshades method because its so permanent and i kept messing up and having to hand sand it all back down.
total time speant making the taillights look like that: 10+ hours.... NOT WORTH IT. i should have listened to everyone and bought the overlays...

i really recommend everyone to go with the vinyl overlay method. They look better, are easier to apply and end up saving you so much time (and frustration )
Click to expand...

What problems did you run into? I had two issues with using this stuff...the paint will run if you apply too much at a time...and you can't "top off" the lenses with a light coat becuase it will come out hazzy. You have to do a full coat or nothing. Any hazzy spots that did develop were cleared up with the clear coat. To anyone who is doing this mod...Using the clear coat is most important step! If you dont, you won't be happy.

Here's what you get with clear coat...I'm sure that someone with more experience could have done an even better job...
View attachment 382440
 

1992 2.3LX

New Member
Dec 5, 2002
885
0
0
Ky
Jun 7, 2007
#19
  • Jun 7, 2007
  • #19
i am doing my headlights because they were crystal clear got some smal scratches. Am in the process of sanding them but doubt they will be crystal clear again. So I will just spray them and run HIDs to fix the problem.
 

TrueBlue03

Member
Dec 9, 2003
372
3
18
Bay Area, CA
Jun 7, 2007
#20
  • Jun 7, 2007
  • #20
snowboarder1988 said:
What problems did you run into? I had two issues with using this stuff...the paint will run if you apply too much at a time...and you can't "top off" the lenses with a light coat becuase it will come out hazzy. You have to do a full coat or nothing. Any hazzy spots that did develop were cleared up with the clear coat. To anyone who is doing this mod...Using the clear coat is most important step! If you dont, you won't be happy.

Here's what you get with clear coat...I'm sure that someone with more experience could have done an even better job...
Click to expand...

LOL i feel ya man....those are the same problems. I tried to make it smooth without hazzy so i sprayed it on thicker, but when you spray it on thicker it dries so damn fast that its hard to correct the drippage. I also had some weird problems when clear coating because the clear coat reacted a little weird in some of the more rough hazy spots and didnt get completely smooth.

i agree completely. clear coat is most important to make them look decent. The problem for me was that i still never got that perfectly smooth mirror look that overlays can give you.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
282
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
635
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Y
2004 Roush - Dome Lights and radio not working
  • Yurei
  • Nov 10, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
404
1996 - 2004 SN95 Mustang -General/Talk- Nov 20, 2025
squeak93
A
Resolved Windshield wiper troubleshooting - Wiper turns OFF when Headlights turned ON
  • afjLX
  • Feb 9, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
742
Fox 5.0 Mustang Tech Mar 30, 2025
General karthief
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?