• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

headlight wiring

  • Thread starter Thread starter 92riceeater
  • Start date Start date Feb 15, 2006

92riceeater

New Member
Feb 4, 2006
15
0
0
Regina, Sask. Canada
Feb 15, 2006
#1
  • Feb 15, 2006
  • #1
does anyone know what the highest power level rating on a set of HID headlights can be run on stock wiring?? im looking at getting a set of PIAA HID bulbs but im not sure what the highest rating i can go on stock wiring, and if its not enough were i could get a decent wiring harness for better ones
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 15, 2006
#2
  • Feb 15, 2006
  • #2
It seems to me that the Kelvin ratings are for the quality or tint of the light, not the actual lumins or heat output.

Simply stated, I would not run more than the stock current though the headlight wires.

Good luck.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 15, 2006
#3
  • Feb 15, 2006
  • #3
The headlights use 16 gauge wire, which should be good for about 10 amps. Seeing that there are 2 bulbs, that works out to be about 5 amps per side.

More than 10 amps total current would require the use of a relay. The foglight fix popular for the GT foglights uses a relay. See http://www.corral.net/tech/maintenance/foglights.html for more information.
 

RacEoHolic330

I like to dress like a pretty girl
15 Year Member
Mar 4, 2003
4,014
1,698
203
Allentown, PA
Feb 15, 2006
#4
  • Feb 15, 2006
  • #4
An HID bulb runs at 35 watts at 3 amps. Which is less than a 55 watt halogen bulb. However, when the lights are turned on, the bulb has to be warmed up. This happens during the first 5 seconds when you flip the headlight switch. During this time, the ignitors are pulling around 15 amps, which is more than the stock wiring can handle. If you're going to do things right, you'll either have to make or buy a wiring harness that uses relays to keep the stock wiring from frying.

www.suvlights.com sells wiring harnesses at decent prices.
 

92riceeater

New Member
Feb 4, 2006
15
0
0
Regina, Sask. Canada
Feb 15, 2006
#5
  • Feb 15, 2006
  • #5
thanks RacEoHolic330.....i can now get started and look for some decent bulbs
 
You must log in or register to reply here.

Similar threads

Electrical Ron Francis Headlight / Alternator Harness
  • dan50
  • Apr 30, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
334
Fox 5.0 Mustang Tech Apr 30, 2026
dan50
1
Electrical Headlight harness trouble
  • 1985fox
  • Apr 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
485
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
598
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
688
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Electrical/engine bay harness questions
  • djj62478
  • May 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
479
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
djj62478
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?