Twisted Wedge or AFR 165s for heads. Small runner Canfields are fine, too. Have them shaved to 54cc chambers to get compression up to around 10:1. Carb should be in 525-600cfm range. Holley 570 Street avenger or Demon (Road or Street) in that range would work nice. Edelbrock has a 600cfm, I think, and are easy to work with, but a Holley or Demon will probably make a little more power. While you're in there, you'll want a cam that matches your heads and intake.
Twisted Wedge or AFR 165s for heads. Small runner Canfields are fine, too. Have them shaved to 54cc chambers to get compression up to around 10:1. Carb should be in 525-600cfm range. Holley 570 Street avenger or Demon (Road or Street) in that range would work nice. Edelbrock has a 600cfm, I think, and are easy to work with, but a Holley or Demon will probably make a little more power. While you're in there, you'll want a cam that matches your heads and intake.
i like the idea of a match set;however, it tis expesive but probably worth every penny as for the edelbrock carbs they are cheaper but they are cheaper for a reason that reason is that they suck