• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Heat From Engine Making Cab Hot

  • Thread starter Thread starter plantmeister
  • Start date Start date Jan 4, 2017

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 4, 2017
#1
  • Jan 4, 2017
  • #1
I'm having a problem with my mustang pushing exorbitant amounts of heat into the cab while running. If it idles, it's even worse, like the heater is on. While driving, the heat still seems to warm my feet and makes it really hot in the cab. The temperature in the car generally stays about half or a little above the half on the gauge, so it's not overheating. Has a stock lx hood.

Note, this car sat for 10 years in storage and I haven't had it for long, so I'm sure it could be anything.

Does anyone have advice of how to fix this, or where to start looking? It was suggested to me that the vent/flap is stuck open and thas why the heat is coming into my cab. Any ideas?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,177
17,879
224
Massachusetts
Jan 4, 2017
#2
  • Jan 4, 2017
  • #2
Mustang's are fairly notorious for feeling heat from the exhaust rising up from the trans tunnel hunt. This is normal to a point, but how much is normal, and how much is something else is the big question.

A lot of times, when a carpet is reinstalled without the backing pads, or the inner shifter boot is missing, the heat from the exhaust rises into the trans tunnel and into the cabin. Often times, aftermarket exhaust parts can generate massive amounts of heat as well.

So questions to ask you. What sort of exhaust is on the car? Is the carpet aftermarket and lacking the backing pad? Is the inner shifter boot present. Are you running lean at all?


HVAC draws it's source air from the cowl vent near the windshield, so it wouldn't pull in engine heat.
 

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 4, 2017
#3
  • Jan 4, 2017
  • #3
As far as I can tell, everything on this car is stock, as far as engine parts go. The mufflers and exhaust system I think is original.

Now, the guy who sold me the car said he replaced the carpet, but I do remember him mentioning something about not having the padding under it. I didn't know it would cause this sort of heat.

Running lean, I'm not sure. The car likes to surge constantly when it's warmed up and idling, and the smell from the car around this time is plasticy/chemical smell. I'm not sure if that's what it smells like when it's running lean, but it does smell very strange around the car when it's hot.

And forgive my ignorance, but I'm not sure what/where the shifter boot is.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,177
17,879
224
Massachusetts
Jan 4, 2017
#4
  • Jan 4, 2017
  • #4
Is the car a 5-spd? If so, pull up the shifter trim holding the shifter boot and look under it. Is there a second rubber seal sitting ontop of the shifter? Or can you see the transmission, and the ground under the car?

And yes, not having padding under the carpet saves weight, but that padding is an insulator meant to reduce heat into the passenger compartment.
 

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 4, 2017
#5
  • Jan 4, 2017
  • #5
The car is an automatic, 5.0. I know there's a piece of trim missing around the shifter, but I'm not sure if that matters as much as what you're talking about.

Okay, great...that means I have to pull up the carpet and have that padding installed right? Is this expensive/tedious to do?
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 4, 2017
#6
  • Jan 4, 2017
  • #6
When, not if, you pull the carpet, you can use some dynomat or something similar on the floor pan from the toe board back to the back seat, covering the trans tunnel too, then the padding and carpet.
Not a hard job just time consuming, seats, console have to come out. Don't forget the boot that covers the shifter hole.
I put sound deadener/heat insulation from dynomat from toe boards to tail lights, added about 14 pounds approx. I think it was worth it.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 4, 2017
#7
  • Jan 4, 2017
  • #7
cheap solution is to get some spray on bedliner or underoating and spray the underneath of the car
 

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 5, 2017
#8
  • Jan 5, 2017
  • #8
Okay, good suggestions. I do want to put the mat in at some point, but I might be able to get help doing it, so that would be good.
When I got to work this morning, I let it idle and noticed the majority of the heat is indeed emanating from the center console right next to me. So now that's top priority right next to fixing my air conditioner, because this combined with no ac and Florida heat is killer! X(
Thanks for the info!
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 5, 2017
#9
  • Jan 5, 2017
  • #9
There is also a boot and metal plate around the base of the steering column or maybe just the plate, can't remember, check that for leaks, also your blend door on the heater maybe leaking hot air but the majority will come through that shifter hole.
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Jan 6, 2017
#10
  • Jan 6, 2017
  • #10
If you have stock exhaust, maybe your cats are clogged and heating up and then heating the floor. With a stock exhaust you should not have a lot of heat around your feet.
 
Reactions: 7991LXnSHO

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 9, 2017
#11
  • Jan 9, 2017
  • #11
I checked around the steering column, no heat coming from there. I'm starting to think maybe the blend stood is messed up. My windshield fogs up super fast when I use the heater, like it's seeping through the defrost vent.

As for the mufflers, how can I check for clogs? I was in thick traffic the other day, and had been sitting for a while, and I heard a loud noise and felt it in my car. I had to look around because I thought somebody might have hit me, very lightly. I assume it might have been a backfire? Is this caused by the clogged mufflers?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,177
17,879
224
Massachusetts
Jan 9, 2017
#12
  • Jan 9, 2017
  • #12
plantmeister said:
My windshield fogs up super fast when I use the heater, like it's seeping through the defrost vent.
Click to expand...

That might be a sign of a leaking heater core.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Jan 9, 2017
#13
  • Jan 9, 2017
  • #13
Take out you thermostat and test it on the stove, fill a small pan with water, just don't tell the cook, they usually get testy about using one of their cooking tools for automotive testing, with a meat thermometer see where the stat opens, I test new ones this way and have found several to be faulty. I'd buy one anyway and test it for accuracy.
Do you still have the factory puke tank?
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Jan 9, 2017
#14
  • Jan 9, 2017
  • #14
trust me you would know if your cats were clogging- the car would run like crap and you might have some overheating issues.
Regarding the heater box going- can you smell antifreeze or mold inside the car. Is the passenger side carpet by the firewall damp. Are you needing to top off the radiator or overfill? Those are signs along with your windshield fogging up., If your vents are stuck on defrost that is normall an easy fix- there is a hard plastic line running across the top of the firewall from the vacuum tree marked with A/C to a vacuum fitting in the passenger side corner. Often this line gets brittle and breaks. Just replace it with some normal vacuum tubing. There is also another hard vacuum line from another tee in the passenger corner going inside the car- that one is more complicated to repair if it broke inside the car but 99% of the time its the first vacuum line I spoke about.
 

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 19, 2017
#15
  • Jan 19, 2017
  • #15
mikestang63 said:
trust me you would know if your cats were clogging- the car would run like crap and you might have some overheating issues.
Regarding the heater box going- can you smell antifreeze or mold inside the car. Is the passenger side carpet by the firewall damp. Are you needing to top off the radiator or overfill? Those are signs along with your windshield fogging up., If your vents are stuck on defrost that is normall an easy fix- there is a hard plastic line running across the top of the firewall from the vacuum tree marked with A/C to a vacuum fitting in the passenger side corner. Often this line gets brittle and breaks. Just replace it with some normal vacuum tubing. There is also another hard vacuum line from another tee in the passenger corner going inside the car- that one is more complicated to repair if it broke inside the car but 99% of the time its the first vacuum line I spoke about.
Click to expand...

No overheating, mold or antifreeze smell. Just terrible fogging whenever I use my heater. Sounds like it might be that vent/hose.

As for the cats, I think you might be right. It runs fine, except it tries to die when I shift from park to drive or reverse, the oil pressure has dropped recently, and it idles rough. Oil burn smell when I gun it, etc, but no loss of power. I'm sure there are interconnected problems through this car, but I don't think it's the cats causing those particular problems with it running bad. That's a whole other animal haha
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 27, 2017
#16
  • Jan 27, 2017
  • #16
Did you figure this out?

I wouldn't be so quick to rule out the cats... they can get incredibly hot if even partially plugged, and can cause an engine to stall at low speed...
It sat for a while too, right?

Do you smell antifreeze in your coolant? If it's straight water, you won't smell antifreeze from the heater core.
 

plantmeister

Active Member
Dec 17, 2016
87
6
28
FL
Jan 27, 2017
#17
  • Jan 27, 2017
  • #17
vristang said:
Did you figure this out?

I wouldn't be so quick to rule out the cats... they can get incredibly hot if even partially plugged, and can cause an engine to stall at low speed...
It sat for a while too, right?

Do you smell antifreeze in your coolant? If it's straight water, you won't smell antifreeze from the heater core.
Click to expand...

Not yet-- a couple of pressing matters came up on the Mustang that I had to focus on first, so the heat has been put on the back burner. It may all be connected though, if it is the cats. But the fuel system really needs work, too. The guy I bought it from said the fuel tank was rusted out, so he replaced it and the pump, but NOT the filter. *face palm*. Along with the gaskets being rotted and bolts missing on the filler neck that I can't figure out what size to replace them with, it's a big mess.

Anyway, I've checked the passenger floorboard for dampness and I don't smell any antifreeze in the cab. The reservoir looked like it had antifreeze in it, but I'll check to be sure.

Yea, it sat in storage for 10 years, apparently. And it definitely shows.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,177
17,879
224
Massachusetts
Jan 27, 2017
#18
  • Jan 27, 2017
  • #18
As for the stalling issue when going from D to R, search for "Mustang idle reset procedure" and follow that.
 
You must log in or register to reply here.

Similar threads

J
68 Mustang with Foxbody Engine Stalling Issues - MSPNP2
  • JayV68Stang
  • Mar 13, 2025
  • Digital Self-tuning Forum
Replies
3
Views
402
Digital Self-tuning Forum Mar 13, 2025
JayV68Stang
J
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
833
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
rebuilt heater box, weak heat
  • connella08
  • Jan 10, 2023
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Jan 10, 2023
Noobz347
J
1995 Mustang V6 - Cyl #3 Misfire - Help!
  • JasonBlue
  • Aug 30, 2023
  • 1994 - 1995 Specific Tech
  • 2
Replies
34
Views
5K
1994 - 1995 Specific Tech Oct 20, 2023
def_68
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?