• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Help A Girl Out!

  • Thread starter Thread starter Lady Driven
  • Start date Start date Dec 3, 2013

Lady Driven

New Member
Dec 3, 2013
1
0
2
Nashville, TN
Dec 3, 2013
#1
  • Dec 3, 2013
  • #1
I have a 2000 Mustang GT, five speed and my babe is having some issues!!! When I start the car routine is always push down clutch, hold break and turn the key. What everybody does. I can turn it on and it will start, and like normal, you can watch the needles go up then when the RPM needle gets to 1 it drastically drops to 0 and shuts off like I turned the key off, but the key is still on. It's like you have to make it red line to keep it running. That's just problem one. It also does this when I am driving. God forbid I slow down to 1,000 RPM or even stop. Car totally shuts down and I have to restart it or drop it in a lower gear. My guy friends can't figure it out, and I asked a guy at work and he said it was something but I can't remember at the moment. There is a spot on the top of my cold air intake that seems to be coming off and the hole is somewhat exposed and a guy friend said it may be that, but I have no idea and I really don't have $100 right now to go get it checked out at a Ford dealership. Thought maybe you guys might have an idea? Help a girl out!! PLEASEEEEEE
 

ScottyG00GT

Member
May 10, 2003
141
2
19
South-Central PA
Dec 3, 2013
#2
  • Dec 3, 2013
  • #2
If the hole in your cold air intake is between the mass air sensor and throttle body, it could be throwing off the air/fuel mixture. However, when that happens, it typically just leans out the mixture somewhat and it runs funny and/or "pings" when you accelerate. Of course, if the hole is big enough for a tennis ball, I suppose it could be the problem! My guess, though, is that the hole is not the entire issue, and it just isn't helping anything.

On the idle issue, I had a 2000 GT 5-speed that had an idle problem, but it doesn't sound exactly like what you describe. The car would start right up, but shut off right away unless I put my foot on the gas immediately when it fired up. As soon as my foot was off the gas pedal and the clutch was dipped, it would die. This is a very common problem and really easy to fix. What happens is the idle air control valve (IAC for short) gets clogged with carbon and stops working properly. It's a fairly inexpensive part (I think I paid $40 or $50 for mine but that was ten years ago). You can swap it yourself in about 15 minutes.

The key here though to proper diagnosis of the IAC is tying the car's shutting down to whether or not your foot is on the gas/clutch. With the IAC issue, the car will drive just fine, accelerating, cruising, etc. except when you take your foot off the gas and dip the clutch (i.e. to shift or to idle at a light). You may not notice this when shifting at higher RPMs, except the RPMs will drop faster - but when this happened to me I was able to change gears before the car died. If you have your foot on the gas and this is still happening, I don't think it's the IAC. I recommend searching around the Internet on "Mustang GT IAC" or something like that. This is such common problem on these cars that it is practically a maintenance item. The good news is I replaced mine at 42,000 miles, and my aftermarket NAPA store part was still going strong at 178,000 miles when I traded the car in.
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Dec 3, 2013
#3
  • Dec 3, 2013
  • #3
helped you by moving your thread to the appropriatw forum
 

Mattstang04

15 Year Member
Sep 15, 2006
1,152
144
104
St. Louis, MO
Dec 3, 2013
#4
  • Dec 3, 2013
  • #4
Could be a multitude of things. Idle in lower rpms could be a IAC issue as previously noted. However, if you have to keep the gas pedal floored to keep the engine from dying then you may have a fuel pump, fuel filter, etc issue.
 

sneaky98gt

10 Year Member
Apr 23, 2008
2,387
144
114
NC State University
Dec 3, 2013
#5
  • Dec 3, 2013
  • #5
If there is a leak somewhere in the intake tube, that needs to be addressed first. There should be no holes or leaks anywhere.

If that is all fine, I'd say it's the IAC (idle air control) valve. They commonly go out, and the symptoms are pretty much that the car won't idle unless you have your foot on the gas pedal to keep it running.
 

Prototype

New Member
Dec 3, 2013
5
0
2
Dec 3, 2013
#6
  • Dec 3, 2013
  • #6
IAC (idle air control)

i vote for that..
 

Big-Mike92

Member
Dec 4, 2013
17
2
14
Rustburg, Virginia
Dec 4, 2013
#7
  • Dec 4, 2013
  • #7
its your fuel pumps i believe. when you get down on the car does it hesitate?
 

mransr

Founding Member
Nov 3, 2000
1,188
36
98
Riverside, SoCal
Dec 4, 2013
#8
  • Dec 4, 2013
  • #8
I vote for the IAC too...

It could conceivibly be a battery going bad, that can cause all sorts of weird idling and running issues...but I'd definitely start with the leak in the intake (a pic would help ID that possible issue) and the IAC.
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Dec 5, 2013
#9
  • Dec 5, 2013
  • #9
Another vote for checking the IAC
 

Cory281

Member
Jun 6, 2004
240
0
17
Dec 5, 2013
#10
  • Dec 5, 2013
  • #10
It sounds like you have a vacuum leak. You said your missing a hose that hooks onto your intake? That is probably the cause. Fix it and see if that fixes your problem.

If it doesn't check all of your vacuum lines and see if any are un-plugged or leaking. If one is that is most likely your problem.

I have had vacuum leaks before, when I did my car did the same exact thing you are explaining.

If you can't find the hose that plugs into your intake, let one of us know and we can help you with pictures, etc.
 

usaf_branham

15 Year Member
Oct 30, 2008
927
134
84
Boston
Dec 6, 2013
#11
  • Dec 6, 2013
  • #11
Get a new IAC and make sure that any 'holes' you might have between the MAF and the throttle body are sealed.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
Dec 7, 2013
#12
  • Dec 7, 2013
  • #12
Step one...make sure the intake doesn't have any leaks. If it has a gap like you described that could be the issue.

Step Two...The IAC is the next likely culprit. Sometimes it can be removed and cleaned for it to operate properly but the best bet is replace. They are about $75 at any parts store.

Step Three...if those don't work come back and we will diganose further. Don't worry about other vacuum leaks or fuel pumps right now.

Also...if the fuel filter hasn't been changed, do that as well. Find one of your friends to help you out. It's not hard to do.
 
Reactions: trombonedemon

trombonedemon

Well-Known Member
Jun 25, 2009
1,962
39
59
U.S.A, U.S.A., U.S.A.!
Dec 7, 2013
#13
  • Dec 7, 2013
  • #13
In all of the glorious advice in the room no one ask if she can do the work herself. I had to ask.
 

94GTCoupe

10 Year Member
May 7, 2006
1,412
92
79
CA
Dec 7, 2013
#14
  • Dec 7, 2013
  • #14
trombonedemon said:
In all of the glorious advice in the room no one ask if she can do the work herself. I had to ask.
Click to expand...

I don't know about all that.
But what I have learned from this thread is, if I ever need immediate responses to a problem I may have, I'm changing my avatar to a picture of a pretty girl!
 
Reactions: Deek, trombonedemon and Noobz347

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Dec 7, 2013
#15
  • Dec 7, 2013
  • #15
sounds like @stykthyn
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,303
21,474
234
Box behind Walmart
Dec 7, 2013
#16
  • Dec 7, 2013
  • #16
davis3 said:
I don't know about all that.
But what I have learned from this thread is, if I ever need immediate responses to a problem I may have, I'm changing my avatar to a picture of a pretty girl!
Click to expand...


Funny but definitely true.
 
Reactions: trombonedemon

mransr

Founding Member
Nov 3, 2000
1,188
36
98
Riverside, SoCal
Dec 8, 2013
#17
  • Dec 8, 2013
  • #17
davis3 said:
But what I have learned from this thread is, if I ever need immediate responses to a problem I may have, I'm changing my avatar to a picture of a pretty girl!
Click to expand...

yup...and it seems she hasn't been back either...
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Dec 8, 2013
#18
  • Dec 8, 2013
  • #18
madspeed said:
sounds like @stykthyn
Click to expand...
Hey Mike started it
 

Wrongdoer

Member
Sep 1, 2013
8
0
12
Phoenix, Az
Dec 12, 2013
#19
  • Dec 12, 2013
  • #19
Lady Driven said:
I have a 2000 Mustang GT, five speed and my babe is having some issues!!! When I start the car routine is always push down clutch, hold break and turn the key. What everybody does. I can turn it on and it will start, and like normal, you can watch the needles go up then when the RPM needle gets to 1 it drastically drops to 0 and shuts off like I turned the key off, but the key is still on. It's like you have to make it red line to keep it running. That's just problem one. It also does this when I am driving. God forbid I slow down to 1,000 RPM or even stop. Car totally shuts down and I have to restart it or drop it in a lower gear. My guy friends can't figure it out, and I asked a guy at work and he said it was something but I can't remember at the moment. There is a spot on the top of my cold air intake that seems to be coming off and the hole is somewhat exposed and a guy friend said it may be that, but I have no idea and I really don't have $100 right now to go get it checked out at a Ford dealership. Thought maybe you guys might have an idea? Help a girl out!! PLEASEEEEEE
Click to expand...


Is the hole in your intake up near the throttle body (towards the engine) and is about the size of a dime? If so, thats where a sensor goes that you car may not have (mine doesn't). Quick and easy fix, drive it to your local Ace/Lowe's/Depot and in their hardware dept they have a section for rubber plugs, grab one that looks like a cone and also looks like it will plug the hole if you push it down into it. I went to Ace, got a smaller one so that it wouldn't stick into my intake or out of the tubing too far, worked great.
 
You must log in or register to reply here.

Similar threads

C
98 gt fuel pressure issues
  • chasecollier1984
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
119
SN95 4.6L Mustang Tech Jun 2, 2026
chasecollier1984
C
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
204
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
1999 Mustang GT - No Start- Need help understanding the fuel pump circuit and how it works
  • 99gtGuy
  • Nov 4, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
560
1996 - 2004 SN95 Mustang -General/Talk- Nov 7, 2025
04newedge-
0
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
199
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
S
New motor help. First start successful. Now will not turn over.
  • SavStang
  • Jun 1, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
142
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2025
SavStang
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?