I just recently replaced my radiator becuase of a hole. I also decided to change my lifters, as they were getting sticky. I did it all at once, and now my system is not building up any water pressure.
The fear of the lower being done incorrectly, I have redone it, and it all checks out. There are no visual leaks, and the system worked fine before, and isn't making any pressure now.
I use the pressure tester and load the system to 16 lbs, and it takes about 15 min for the line to drop 1lb.
The thing that i done understand how can the leak be so small, but the system is unable to build up any pressure.
Any help or input is greatly appreciated, Thanks in advance.
The fear of the lower being done incorrectly, I have redone it, and it all checks out. There are no visual leaks, and the system worked fine before, and isn't making any pressure now.
I use the pressure tester and load the system to 16 lbs, and it takes about 15 min for the line to drop 1lb.
The thing that i done understand how can the leak be so small, but the system is unable to build up any pressure.
Any help or input is greatly appreciated, Thanks in advance.