HELP -- Belt Question

nonosstang · Feb 28, 2006

I have a question regarding the Paxton Supercharger setup for carbed Fords. Can you run the setup with an A/C? If so, how would you setup the belts?

Would this work with three belts:

1. Blower, Crank
2. Crank, Water Pump, Alternator
3. Crank, Water Pump, A/C

Is it ok to run more than one belt on the water pump?

Also, does anyone know of any serpentine conversions that would work with the blower and A/C?

Thanks.

iskwezm · Feb 28, 2006

it depends on the blower type(SN kit or Novi)but either way, you dont change your existing belt set up.The blower geta crank pulley sanwiched to the stock one and then get a ribbed belt that drives only the blower.

mustangdave · Feb 28, 2006

Paxton has a website and a phone number to answer these type of questions.If that is the only question you have about the blower setup, you obviously aren't serious.

nonosstang · Feb 28, 2006

mustangdave said:
Paxton has a website and a phone number to answer these type of questions.If that is the only question you have about the blower setup, you obviously aren't serious.

Hey, thanks for the great answer.

I was wondering about the belt setup with the blower and A/C and I didn't really feel like calling Paxton while I'm at work.

If I would have had any other questions about the blower setup . . . I would have asked. Since I didn't ask about anything else . . . I didn't want an answer to anything else. So, don't tell me I'm not serious.

nonosstang · Feb 28, 2006

iskwezm said:
it depends on the blower type(SN kit or Novi)but either way, you dont change your existing belt set up.The blower geta crank pulley sanwiched to the stock one and then get a ribbed belt that drives only the blower.

Does the Paxton setup come with a crank pulley for the v-belts and the blower? Or, is it just a pulley for the blower that you use with your existing crank pulley?

HELP -- Belt Question

nonosstang

iskwezm

mustangdave

My rearend needs a stud and two nuts.

nonosstang

nonosstang

Similar threads

HELP -- Belt Question

nonosstang

iskwezm

mustangdave

My rearend needs a stud and two nuts.

nonosstang

nonosstang

Similar threads

Privacy & Transparency

Privacy & Transparency