Help stangers, I was going to go get my car dyno tuned, but the time and funds are not here yet. Please help me figure out what my pressure should be setup as, or atleast just a tad rich. I have and adjustable fuel press. reg. Here is my mods:
Engine: Edelbrock Upper and lower, 65mm Throttle body, 76mm C@L MAF, Cold Air.
Exhaust: Equal Length Headers, X-Pipe w/ cats, Side Exhaust
FUEL SYSTEM: 24lb injectors, MAF for 24lb, STOCK fuel pump, and AFR SET AT 29/30psi, when I floor it it goes up to about 38psi.
If i drive to dc and back from my house in vienna I am currently going through half a gallon. Thanks guys-J
Engine: Edelbrock Upper and lower, 65mm Throttle body, 76mm C@L MAF, Cold Air.
Exhaust: Equal Length Headers, X-Pipe w/ cats, Side Exhaust
FUEL SYSTEM: 24lb injectors, MAF for 24lb, STOCK fuel pump, and AFR SET AT 29/30psi, when I floor it it goes up to about 38psi.
If i drive to dc and back from my house in vienna I am currently going through half a gallon. Thanks guys-J