• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help Headers

  • Thread starter Thread starter 89notchfox
  • Start date Start date Sep 15, 2005
8

89notchfox

New Member
Sep 12, 2005
30
0
0
douglasville ga
Sep 15, 2005
#1
  • Sep 15, 2005
  • #1
ok, I got my bbk long tube headers i jacked the motor up, and removed everything needed to complete installation. and i am still having tons of trouble with header clearance. They just won't bolt in. drivers side collector is hitting tranny, and passanger side K-member is in the way. The directions that came with the headers are not helping. this is my 2nd set of headers i have tried to install, so if anyone has any advice i NEED it. before i smoke my self to death!
 

Jason 302

10 Year Member
Aug 9, 2003
685
71
68
Newark, Ohio
Sep 15, 2005
#2
  • Sep 15, 2005
  • #2
You know that one side you have to come in from the bottom and the other from the top, right? I've taken out and intalled my BBK long tubes twice, and haven't had any problems. Do you have the motor jacked up enough?
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Sep 15, 2005
#3
  • Sep 15, 2005
  • #3
cutting them might help if you have the kind that seperate the headers from the collector
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
Sep 15, 2005
#4
  • Sep 15, 2005
  • #4
Mallet

I'm not joking. Smack those things into place. Tip the motor a bit to gain extra clearance

Longtubes are about as difficult to install as you are experiencing.
 

Dbeck002

New Member
Apr 30, 2005
710
0
0
South florida
Sep 15, 2005
#5
  • Sep 15, 2005
  • #5
Took me 3 days to install my long tubes.

But in the end the easiest thing was the unbolt the engine, jack it up high and pull out anything you humanly can to get them in there.

I also beat on the floor pans a little. Oh and grinded some of the bellhousing.

Heh, the result is worth it though.
 

Modular2v

Founding Member
Jun 30, 2002
3,222
23
99
oklahoma
Sep 15, 2005
#6
  • Sep 15, 2005
  • #6
only took me about 2 hours to install mine......i carbed my car though.....the passenger side is what sucks!
 
You must log in or register to reply here.

Similar threads

Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
275
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
474
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
J
i need help
  • JK.
  • Oct 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
586
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
JD1964
W
Dipstick
  • wccurtis1963
  • Jun 13, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
265
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
Willybill32
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?